Posts: 3,217
Threads: 0
Joined: Jan 2006
I use a paint roller. I like the little 6" ones with the small diameter rollers
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I like the 4" Foam roller on a J handle. I found the 6" to be harder to control.
Worst thing they can do is cook ya and eat ya
GW
Posts: 2,540
Threads: 0
Joined: Jul 2007
Location: Long Island, NY
I've heard a hack saw blade works pretty well too.
Benny
Posts: 324
Threads: 0
Joined: Mar 2011
Location: Athens, OH
Sponge roller user here.
Bill Schneider
Posts: 3,390
Threads: 1
Joined: Jan 2002
Bill Schneider said:
Sponge roller user here.
This is what I use, although I'll have to check out the trowel. Never seen that before.
-Marc
Posts: 24,819
Threads: 0
Joined: Dec 2008
Hard rubber ink roller.
Won't absorb glue, easy to clean.
Posts: 2,580
Threads: 0
Joined: Jul 2008
Location: phila pa
Woodjets said:
Hard rubber ink roller.
Won't absorb glue, easy to clean.
+
This is what I use but my glue ups aren't that large . I use the Speedball hard roller , the head pops out for easy clean ups .
Failure is simply the opportunity to begin again, this time more intelligently. "HF"
Posts: 489
Threads: 0
Joined: Sep 2009
Posts: 253
Threads: 0
Joined: Jun 2010
Shovel Man said:
The glueup is a bent lamination of 4 plys 30" x 72". The bend is pretty gentle, only 120" radius, but I need good strength in the final piece. Planning on using ordinary yellow glue, which will be plenty strong. Thinking of using a squeegee. What would you use?
Roller 9-12" - that's what we use to use when doing counters.
