African blackwood turning squares
#10
I still have a good quantity of 1-7/16 and 1-1/2 squares of various lengths. All the long 1-1/2 pieces are gone so the remaining are from 8" to 10" long. Some longer lengths of 1-7/16 remain.

Cost for the 1-7/16 squares are $0.76 per lineal inch and $1.12 per lineal inch for the 1-1/2 squares. If you buy a LFRB full of squares I'll discount it by 25%.

Let me know what you want and I'll pick out the pieces and post pics for approval.

1-1/2" squares


1-7/16 squares
Cellulose runs through my veins!
Reply
#11
Steve, can you give a ballpark lineal feet on a lfrb? For the 1 7/16"?
Steve K


Reply
#12
somewhere around 30.
Cellulose runs through my veins!
Reply
#13
So how much would a lfrb cost?
As of this time I am now teaching vets again.  If you have any lumber scraps we can use them to glue up to make some bowl from a board which we have not done yet..  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#14
SteveS said:


somewhere around 30.




Okay thanks, out of my reach for now at least.
Steve K


Reply
#15
Arlin Eastman said:


So how much would a lfrb cost?




Arlin,
approx. 30 feet would be approx. 360 inches at .76 per inch. so, approx. $270 if my math is correct.
Steve K


Reply
#16
Thanks Steve I was trying to make it simple for others to know also and that is a lot of nice wood for that price too.
As of this time I am now teaching vets again.  If you have any lumber scraps we can use them to glue up to make some bowl from a board which we have not done yet..  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#17
@branchacctq the top row is the 1-1/2" squares and the 1-7/16" on the bottom row.

1-7/16" lineal qty = 179" price = $136
1-1/2" lineal qty = 128" = $143

Total = $279 * 0.75 (25% LFRB discount) = $209.25
shipping is $16.35 => $225.60 total

Cellulose runs through my veins!
Reply
#18
All the 1-1/2" squares are sold. Still have a few score 1-7/16 squares left.
Cellulose runs through my veins!
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)