Posts: 40,076
Threads: 0
Joined: Apr 2007
Just got an email about it I am curious to hear more from people that have used it
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 935
Threads: 0
Joined: Jul 2006
Taking it up a couple more notches, did anyone see Dewalt's new stuff? 60 and 120 volt cordless? Yikes!
Good judgement is the product of experience.
Experience is the product of poor judgement.
Posts: 10,773
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Yes, there has to be a bunch of engineers thinking "why didn't I think of that"
Ed
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
EdL said:
Yes, there has to be a bunch of engineers thinking "why didn't I think of that"
Ed
Probably because around 40v and below is considered safe to skin contact. However higher voltage reduces amps and wire sizes. I wonder how close it will be to the advertised voltage. IE their 20v stuff is actually 18v.
Posts: 304
Threads: 0
Joined: Jul 2007
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
obviously, batteries are less happy at high currents, but they don't really like to be in series either. And high voltages makes charging harder as well. Our 36v Dewalt drill went through batteries like crazy, all I can say is I'm glad it wasn't my money. finally gave up on it because doing the paperwork to order new batteries all the time was too much work
Posts: 1,172
Threads: 0
Joined: Dec 2007
apparently only sold in Europe.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
EricU said:
obviously, batteries are less happy at high currents, but they don't really like to be in series either. And high voltages makes charging harder as well. Our 36v Dewalt drill went through batteries like crazy, all I can say is I'm glad it wasn't my money. finally gave up on it because doing the paperwork to order new batteries all the time was too much work
True. Lithium packs will have more problems as you add more cells in series because it only takes one cell that's not matched quite right to ruin a whole pack and not let it recharge.
A friend of mine was using dw and I have fixed some of his "20v" batteries that wouldn't charge as one cell was slightly too low and the charger won't charge the pack. Just charge that cell a little to make the charger happy and let it do its thing.
As for the saw makita has one but you have to free up 2 batteries to run it.
I don't have any milwaukee 18v stuff yet but I am looking at buying in to get the hole hawg. I have a bunch of the 12v and the batteries are the best I have ever used. None have failed and the oldest are 3 years plus old. Never had any battery last that long.
Posts: 40,076
Threads: 0
Joined: Apr 2007
I bought the makita miter saw years ago charged up the batteries cut one 2x and put it on CL as I could tell it wasn't up to the task. I ran into the guy that bought a few years after that and he was not happy with the purchase
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
i remember the rumors around here a while ago about the milwaukee 9.0 ah battery.
i'm a BIG fan of the milwaukee 18V line -- i've got a bunch of tools, and also 2 of the 5.0 ah batteries. just great stuff.
