Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
I have a block of Leopard wood I want to cut into 9 smaller blocks. What's the best way to cut this so it comes out right?
The block is 7" X 7" X 2.25".
A. Table saw with a thin kerf rip blade.
B. RAS with regular combo blade.
C. Bandsaw with average tooth count blade.
Posts: 22,408
Threads: 0
Joined: Dec 2004
Location: Monrovia, AL
Depends, what size are the 9 blocks you want?
Posts: 29,152
Threads: 1
Joined: Aug 2002
if you want them to be square cubes a regular kerf blade will do it in the least amount of cuts
TS or RAS will work fine.
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
If it is something I want looking the best when done, and I think Leapordwood is something you are probably going to want to maintain appearance on, I would use a BS for the smaller kerf. This allows shallow passes on the jointer/planer, but maybe with your small stick with a hand plane to get the saw marks off, and clean up the piece.
Worst thing they can do is cook ya and eat ya
GW
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
I don't own a jointer or a planer. I am making bottle stoppers out of these blocks.
Posts: 10,717
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
If you're making bottle stoppers, use the bandsaw. Less waste.
Still Learning,
Allan Hill
Posts: 29,152
Threads: 1
Joined: Aug 2002
Herb G said:
About 2 1/3" sq.
Where is the extra 1/16" in thickness coming from then?
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
AHill said:
If you're making bottle stoppers, use the bandsaw. Less waste.
That's kind of the way I was leaning. The other saws scare me when it comes to making dust with them.
Posts: 2,274
Threads: 90
Joined: Jun 2001
+1 on BS
John
Always use the right tool for the job.
We need to clean house.
