Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
I want to build the following jig to put mortises in a set of table legs, but the legs are 2.75" square, and the 3" clamps used won't work, at least according to one of the comments below the video.
https://www.youtube.com/watch?v=mKZJyBuqYIsSo I'm trying to find a 4 inch, or even better, a 5 inch version of this:
https://www.amazon.com/Jorgensen-Hold-Do...ords=1623+clampAny advice?
Semper fi,
Brad
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Punch a larger diameter hole, and Bobs yer Uncle
Worst thing they can do is cook ya and eat ya
GW
Posts: 29,152
Threads: 1
Joined: Aug 2002
just mill two wooden standoffs (extenders) to push the clamps back to open the area....
Easy peasy
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 18,483
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
JGrout said:
just mill two wooden standoffs (extenders) to push the clamps back to open the area....
Easy peasy
Yep, I have some of those clamps and for this application, they're really ideal.
Shim them out.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
So simple I couldn't see it.
Thanks.
Semper fi,
Brad
