Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
I've never used a shaper and traded for a 1-hp import knock-off. It's got a 1/2" threaded shaft but the only cutter heads I can find are 3/4" bore. Can I use a sleeve or adapter to use the 3/4" bore heads?
If so where can I find one?
If not, any leads on 1/2" bore cutters?
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 117
Threads: 0
Joined: Jul 2002
You can find 1/2" bore cutters by Grizzly and others. I have found that a lot of 3/4" bore cutters come with an adaptor for 1/2", and you really only need one set.
They have rims that sit on the cutter and fit in the hole. The hole in the adaptor is 1/2". Only issue is that a 1/2" shaft is not as stable (can chatter more) than a 3/4" shaft.
Bob H.
Posts: 2,002
Threads: 0
Joined: Feb 2003
How about a collet and 1/2" router bits
You will find they are far easier on the wallet also
Posts: 29,152
Threads: 1
Joined: Aug 2002
options abound Nearly every outlet for shaper knives sells the bushings, the T bushings ( you have to have these) and if your machine is capable of it even a bigger spindle.
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Thanks for the links. Looks like what I need.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
