Posts: 1,914
Threads: 0
Joined: Apr 2007
Phil, I have attached tops with your method, many times, although with the screws going in at a 90 degree angle, not in pockets.
I make the hole for the screw slotted so it can move.
So far, so good. (I have had some pieces for over 10 years without cracking).
Now, I am not claiming this is the best method, but it works.
Posts: 18,493
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Thank you all.
I will get some z-clips. Rockler shows them out of stock online but maybe the store will have some.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 528
Threads: 0
Joined: Dec 2004
Phil Thien said:
Thank you all.
I will get some z-clips. Rockler shows them out of stock online but maybe the store will have some.
Lee Valley has them.
Hank Gillette
Posts: 86
Threads: 0
Joined: Mar 2008
Don't give up on pocket screws so quickly. The Townsend-Goddard's used pocket screws to hold on table tops on some of the finest furniture ever made in America. Over 200 years and still holding strong and without splitting the top. Obviously they had enough space around the screw for the wood to expand and contract, but still. Check out a copy of "Master Craftsmen of Newport" to see the pics.
Semper Audere!
Posts: 1,103
Threads: 0
Joined: Oct 2000
a screw is a screw, just drill the apron hole larger and do not overtighten the screw to allow for movement
