Posts: 415
Threads: 0
Joined: Feb 2008
Custom set of 4 chisels in sizes of 1/8", 1/4", 3/8", 1/2". O-1 steel, hardened to RC 62, sides are ground to 20 degrees. The 1/2" is 8" long and the other 3 are 6.75" long. Resin infused handles dyed to look like ebony. They are sharp and ready to go. Never used, these chisels are now out of production. They have great balance and are built like a tank, just beautiful. Asking $225 for set, shipping included.
Thanks for looking, please let me know if any questions.
Kevin
Posts: 257
Threads: 0
Joined: Dec 2004
At that price, do you think we could get some close-ups?
Thanks.
Posts: 415
Threads: 0
Joined: Feb 2008
Hi David,
Sorry, I am not much of a photographer and look at these pics as "proof of life" photos. Here's another attempt, hope it helps. The chisels are absolutely mint, not a spec of anything on them except sharpness. I contacted Bob Zajicek for a price and that is what he recommended as he sold his last set about 6 months ago for quite a bit more than that. Please let me know if you have any further questions or interest.
Thanks.
Kevin
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
I have purchased from Kevin and his offerings were as advertised. Nice person to deal with.
Ag
Posts: 635
Threads: 0
Joined: Jul 2007
Location: Bridgeport, CT USA
I have the 1/4 inch chisel. I'd own the 1/8 inch if Bob was still making these. Excellent chisel for paring dovetails.
" />
" />
Posts: 415
Threads: 0
Joined: Feb 2008
The chisels have gone off to a new home, thanks everyone.
Kevin
