Posts: 12,888
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
You must be talking about a different Bosch sander. The ROS65VC with on board canister had the best results in FWW's test a few years ago, better than the Festool. With vacuum they were both similar, maybe the Festool was slightly better. I can't remember because I was focused on the results using the on board canister. Having used it now for about 3 years I am very happy with its performance and with the dust collection. It does a very good job as long as the whole pad sits on the wood. When it's hanging over the edge, of course it's less effective, as any sander would be.
John
Posts: 379
Threads: 0
Joined: Nov 2010
I have the Ridgid and it does a great job. I tend to use a little higher grit than most for finish sanding, but it hasn't left swirl marks on the lower grits either.
I removed the little baggy and just connect the shop vac hose directly to it. Dust collection has been fantastic.
Posts: 18,504
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
The Bosch units are listed as PRIME DAY deals but don't seem to be any great deal at all. A couple of bucks off.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 1,540
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
I bought a Ryobi RS290G on sale at Lowes last November
for $30. It's a 5", 8 hole sander.
I have tortured this tool from day one & it's still going strong.
Posts: 1,919
Threads: 0
Joined: Jul 2007
Location: Central Indiana - Kokomo Area
Isn't the Ceros an amazing sander? I love mine. It is the mid orbit one (I think 3/16") and in the not so distant future with I plan to get the fine orbit one. It is so light, no vibration and almost no dust when hooked to a vac. If you are using Abranet, I do suggest you get one or two of those sacrificial pads so that you save your hook and loop on the sander.
Posts: 1,540
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
I really like the Abranet. My sander came with a hard pad on it so I replaced it and got a couple of the sacrificial pads at the same time. I am impressed with how smooth it is and no dust! The hose in my pictures is so light you don't even know it's there. You only feel the weight of the cord. This is a far cry from the sander I was using.
Lonnie
Posts: 3,755
Threads: 0
Joined: Feb 2005
My older Bosch died and I replaced it with a new Bosch and the difference was amazing. I imagine that is typical with good quality sanders. Not sure what changed but it is smoother operating and the finish is much better. I suspect you will find what ever you buy will be a step up from you old one.
I have found how much a boat is used is inversely related to how much it weighs.
Kudzu Craft Lightweight kayaks
Posts: 18,504
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Herb G said:
I bought a Ryobi RS290G on sale at Lowes last November
for $30. It's a 5", 8 hole sander.
I have tortured this tool from day one & it's still going strong.
Ryobi is kinda my go-to tool brand but the Ryobi at HD (I think only HD carries Ryobi, not Lowes) is $40. And I've seen people rave about brands that don't leave swirls. Given that my PC left swirls, and seeing the Bosch was only $30 more than the Ryobi, and seeing as I had $25 in Menards cash, and seeing as John likes the Bosch a lot, well, I went and got the Bosch this evening.
Won't be able to try it until this weekend, though.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 3,493
Threads: 0
Joined: Jun 2008
iublue said:
Isn't the Ceros an amazing sander? I love mine. It is the mid orbit one (I think 3/16") and in the not so distant future with I plan to get the fine orbit one. It is so light, no vibration and almost no dust when hooked to a vac. If you are using Abranet, I do suggest you get one or two of those sacrificial pads so that you save your hook and loop on the sander.
The Ceros sanders have been discontinued.
