Posts: 20
Threads: 0
Joined: Jul 2016
Location: Laurens SC
Hey folks. Will Arm-R-Seal stick to Zinsser regular shellac. I realize their regular shellac is not dewaxed and not usually recommended for an undercoat, but will this combination work? Or am I in for a load of trouble?
Thanks
George
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Be interesting to see what the experts say. If it were me, I'd get some dewaxed shellac - why take the chance over a few bucks?
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 12,893
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I've never had any trouble with ARS, or even EnduroVar, over Zinsser amber shellac. But if it makes you nervous then either use Sealcoat shellac instead, or apply a coat of it over whatever shellac you already used. Sealcoat sticks to most anything and most anything will stick to it.
John
Posts: 20
Threads: 0
Joined: Jul 2016
Location: Laurens SC
John, Good to know that ARS will work over shellac. I thought it might but I thought I would see if anyone has had any experience with this combo. I'll give it a try and see how it goes.
George
