Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
(08-08-2016, 06:19 PM)mdickmann Wrote: popcorn ceiling - first have it tested for asbestos, if none found, wet and scrape
Not popcorn. This was stippled. Think thinned down joint compound rolled onto the ceiling and a sponge/rag/tool used to press, twist, release to create the pattern. Let harden/set then primed and painted. Wetting/scraping wouldn't touch this stuff.
Posts: 64,693
Threads: 3
Joined: Feb 2007
Location: Merryland
(06-09-2016, 06:55 PM)jteneyck Wrote: Thanks for the info, but a palm sander overhead? For 2 hours? You must be pretty young!
About opening the boxes. Don't just open them, take the lumber out and sticker it so air can circulate completely around every board - for at least a week before you use it. Dense stacked wood won't equilibrate for weeks/months.
John
What he said
Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
(08-10-2016, 09:37 AM)Snipe Hunter Wrote:
What he said
WELCOME BACK!
This project has grown in scale quite embarrassingly....the wood has been in the house for over three months now. Went from "lets pull the carpet and install wood" into this/that/everything being documented
Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
Made some decent progress over the past week.
Stairs are basically done:
![[Image: 20_StairsDone_zpsg19rlmfi.jpg]](http://i1279.photobucket.com/albums/y535/brnhornt/20_StairsDone_zpsg19rlmfi.jpg)
Drywall fixed and bathroom painted:
![[Image: 21_BathroomPainted_zpsedm9nwns.jpg]](http://i1279.photobucket.com/albums/y535/brnhornt/21_BathroomPainted_zpsedm9nwns.jpg)
Finally laying some flooring!
![[Image: 22_FlooringStarting_zpslrvkrvad.jpg]](http://i1279.photobucket.com/albums/y535/brnhornt/22_FlooringStarting_zpslrvkrvad.jpg)
Posts: 12,889
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
It's all looking super; very nice work.
John
Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
Was making pretty decent progress on the flooring when I hit a detour. Wife decided that wood in the guest/half bath wasn't worth the risk and that we needed tile instead. So rather than finishing off a room of wood floor this weekend, I finished setting some 2" hex tiles
![[Image: 23_BathroomTileSet_zpsybgpups1.jpg]](http://i1279.photobucket.com/albums/y535/brnhornt/23_BathroomTileSet_zpsybgpups1.jpg)
Posts: 64,693
Threads: 3
Joined: Feb 2007
Location: Merryland
I like that floor. Is it on a backer or directly on the plywood?
Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
It's sitting on 1/4" hardi backer attached to the subfloor with non-modified thinset and roofing nails.
Posts: 40,104
Threads: 0
Joined: Apr 2007
Really nice tile where did you find it?
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 3,279
Threads: 0
Joined: Feb 2005
Location: Cleveland, OH
We were discussing the idea of switching the plan from hardwood to tile in the room and stopped by "The Tile Shop" a couple of miles down the road just to take a gander. My wife was instantly drawn to marble tile but the cost was out of our budget. Happened to walk by the clearance section and there it was for 30% off. Brought it back into our budget and it pretty much made the decision for us
