Posts: 36,556
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I stumbled across this
http://buymistbox.com
Worth the money or is it more snake oil? Is this something I could engineer myself? I'm thinking of an electrically controlled valve hooked to the A/C such that whenever it's on the valve is open and the mister is going.
Posts: 13,415
Threads: 4
Joined: Jun 2007
Location: New Jersey
http://www.energyvanguard.com/blog-build...ning-costs
I was intrigued until I read this. They could have an axe to grind, but still.....
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 4,751
Threads: 0
Joined: Aug 2006
Not sure I would want to spray city (or well) water on my condenser.
Depending on what's in the water, corrosion could be a problem.
.
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Posts: 36,556
Threads: 3
Joined: Nov 2004
Location: RTP, NC
That article was actually a good read and I can see how there would be issues with it. I also didn't think about the high humidity.... I live in an area that is often very humid so I can see how it would be a lot less effective where I live than say, AZ.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Don't waste your money. If your condenser isn't removing heat fast enough, it needs replacing or repairing.
This can also change the way it was designed in order to operate properly. It isn't wise to lower the head psi below a limit.
Your ground will become a swamp.
The water deposits will ruin the coil.
The wasting of good water is down right wrong.
Keep the condenser washed and clean and providing it with shade if it is in direct sunlight is the best you can do (Shade is optional).
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
if your humidity was low enough for it to work well, you probably already have a swamp cooler
Posts: 22,717
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
08-11-2016, 11:46 PM
(This post was last modified: 08-11-2016, 11:47 PM by blackhat.)
I was going to say no but decided "HELL NO" suited better.