Posts: 1,540
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
I would like to have a more precise fence than the one currently on my bandsaw. I have a Laguna 14-12. I know Laguna makes the Driftmaster fence and that's the type of fence I'm looking for: a fence that can be precisely set (micrometer type) and that will allow you to return to a previous setting. Any suggestions or pictures of your setup would be helpful. Thanks!
Lonnie
Posts: 333
Threads: 0
Joined: Apr 2005
There is a microadjuster available for the Kreg Bandsaw fence. I also noticed that Jet's new 15, 18, and 20 inch bandsaw have microadjustable fences. You could check to see if Jet sells the fence separately from the saws. Neither of these fences works the same way the Driftmaster does, so if that's what you want then there probably isn't an alternative.
--Geoff
**********
Measure with a micrometer. Mark with Chalk. Cut with a chainsaw.
Posts: 1,540
Threads: 0
Joined: Oct 2003
Location: Columbus, Ohio
Thanks Geoff I'll check them out.
Lonnie
