Posts: 920
Threads: 0
Joined: Oct 2001
While installing some vinyl porch railings I left epoxy fingerprints where they are highly visible. How can I erase my mistake?
Posts: 64,695
Threads: 3
Joined: Feb 2007
Location: Merryland
At least it's on vinyl. I'd try a"little" lacquer thinner before it gets rock hard.It might dull the vinyl a little..
Posts: 12,607
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Will the lacquer thinner wrinkle the vinyl?
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 64,695
Threads: 3
Joined: Feb 2007
Location: Merryland
Is this sheet vinyl or something heavy like a vinyl fence post?
Posts: 920
Threads: 0
Joined: Oct 2001
The dried epoxy is on the cap of a porch rail post.
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
Were it me, I'd just get a new cap.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Try scraping it with a dull knife. Vinyl should flex enough to get an edge to pop up.
Good luck!
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
