Posts: 912
Threads: 0
Joined: Nov 2004
Sapele wood-dust has made its way onto the surface of some very light-colored poplar I'm working with (making a small box ). My attempts to carefully wipe and blow the dust off the poplar has cause some of it to lodge in the pores of the poplar. As soon as I realized this, I stopped, and switched to gently using a shop-vac with a brush attachment. Still no good. I wonder -- how can the problem be solved? I would appreciate your thoughts!
Posts: 29,152
Threads: 1
Joined: Aug 2002
wipe the poplar with a tack cloth
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Just get it wet, then lightly sand it. You'll raise the grain when you finish it anyhow. Doing it early will get that out of the way. Water, MS, 1/2# Shellac, pick your poison.
Worst thing they can do is cook ya and eat ya
GW
Posts: 680
Threads: 0
Joined: Nov 2009
I've found vacuuming the wood works very well. Sometimes a pink eraser helps to as that is how we remove the chalk from Spanish cedar after fitting the neck and tail blocks on arch top guitars.
"...cuttin' your presidency off right now. Just quit. Because if this is you helpin' us, then stop helpin' us."
Posts: 2,385
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
(10-23-2016, 12:06 PM)Steve N Wrote: Just get it wet, then lightly sand it. You'll raise the grain when you finish it anyhow. Doing it early will get that out of the way. Water, MS, 1/2# Shellac, pick your poison.
I would have never thought of "wet then sand". I learned something today!
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 596
Threads: 0
Joined: Mar 2007
Location: NW of Fort Worth, TX
A bit of water (or spit) works well to raise a dent and then sand it flat.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
(10-23-2016, 02:18 PM)Bill Holt Wrote: I would have never thought of "wet then sand". I learned something today!
When you apply any wet outer coating you raise grain, generally you then follow up with a light sanding, or scrapers to remove that fuzz. Either that or have hairy looking projects. DAMHIKT
Worst thing they can do is cook ya and eat ya
GW
Posts: 912
Threads: 0
Joined: Nov 2004
Thanks for the suggestions. Just one follow-up question: would using a tack cloth interfere with finishing the wood with paraffin?
Posts: 20,950
Threads: 0
Joined: May 2005
Be sort of careful about water on tropical exotics. Some are still used as dye woods, and the extractives are water-soluble. Do dry work first. Old tooth brush or fresh fingernail brush good candidates. MS or other non-polar solvents better choice than water or ketones/alcohol. Tack cloths won't interfere with oil finishes.
Better to follow the leader than the pack. Less to step in.
Posts: 912
Threads: 0
Joined: Nov 2004
Thanks, Mike. And thanks to each of you for taking the time to respond!
