Posts: 307
Threads: 0
Joined: Sep 2016
Listening to FWW Shop Talk Live while working in the shop and those guys said to sand cherry to prevent blotching, even after planning with a smoother, go back and sand 150, 220, 400, 600....in context, they were not talking about a production shop, they were talking about guys like me, non vocational wood workers, one off type of stuff.
This is not the my go to method, so of course I could be doing it wrong, but I don't go back and start a sanding process at 150-220 after I have just used a smoother.
However these are the same guys that built a Shaker workbench without dog holes, then when called on the lack of dog holes, argued that dog holes were not needed on woodworking benches.....
So how do other " non vocational" hand tool woodworkers prep cherry for finishing to prevent blotches?
Regards,
Andy
Mos Maiorum
Posts: 6,108
Threads: 0
Joined: Jan 2006
Location: Central Kentucky
For one thing, I don't sweat too much over cherry blotching. I can never seem to get a perfect surface with planes alone, so I usually lightly sand with 220 grit. Not sure why one would need to go courser then that. Also, sanding with too fine a grit may cause more problems with blotching.
Posts: 4,333
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
I sand cherry after planing it, but not past 220. The best way I have found to prevent blotching is to wipe on coats of cut shellac and then use green Scotch-brite to smooth it. You can stop there or put a topcoat of wipe-on or spray finish for more protection. Some will just wax over the shellac. I'm doing a cherry piece right now.
Posts: 13,416
Threads: 4
Joined: Jun 2007
Location: New Jersey
(11-01-2016, 10:27 AM)Mike Brady Wrote: I sand cherry after planing it, but not past 220. The best way I have found to prevent blotching is to wipe on coats of cut shellac and then use green Scotch-brite to smooth it. You can stop there or put a topcoat of wipe-on or spray finish for more protection. Some will just wax over the shellac. I'm doing a cherry piece right now.
^^^^^This. Google "spit coat shellac"
I use about a one pound cut, actually less. Dries quickly.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 257
Threads: 0
Joined: Dec 2004
I agree. Plane to glass smooth. Lightly (very lightly) rough up with 220. Apply 1 lb (or less) cut of de-waxed shellac, preferably blond mixed from flakes. Apply oil finish to heart's content.
You'll be happy.
Posts: 6,678
Threads: 1
Joined: Jan 2003
Location: Southern California
I found that a < 1# cut of dewaxed shellac lightly sanded back did a good job for me.
Thanks, Curt
-----------------
"Life can only be understood backwards; but it must be lived forwards."
-- Soren Kierkegaard
Posts: 136
Threads: 0
Joined: Feb 2009
I do not sand unless I am staining. Shellac right off the plane or scraper if it's gnarly.
If I'm staining I work up to 320. 600 seems excessive.
