Posts: 1,688
Threads: 0
Joined: Oct 2001
Can I use a 60pt carbide blades (RAS) to cut steel bar? I'm cutting a 1/2" square tube and need 4 pieces exactly the same size. I can cut it with a hacksaw, then grind it to the same size, but cutting in on my RAS would be faster and more accurate.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
No. Carbide tipped blades are for use on non-ferrous metals only.
Brass, aluminum, etc.
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
Carbide tips are brittle -- they shatter if they hit anything steel.
Get a new hacksaw blade and tension it right. Mark the cut well and grind to fit.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 1,688
Threads: 0
Joined: Oct 2001
Thanks. Knew I couldn't cut threaded rod, wasn't sure about tubing.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Posts: 1,998
Threads: 1
Joined: Aug 2016
Cutoff wheel on a angle grinder. Roly
Posts: 22,712
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
If you are going to make a habit of this, consider a cordless portable bandsaw. Drop hints to Santa. They are the cats adze for work like that.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 1,688
Threads: 0
Joined: Oct 2001
(11-27-2016, 08:42 PM)blackhat Wrote: If you are going to make a habit of this, consider a cordless portable bandsaw. Drop hints to Santa. They are the cats adze for work like that.
I have a bandsaw, what type of blade would you suggest?
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Posts: 29,152
Threads: 1
Joined: Aug 2002
(11-27-2016, 04:17 PM)Scouter Wrote: Can I use a 60pt carbide blades (RAS) to cut steel bar? I'm cutting a 1/2" square tube and need 4 pieces exactly the same size. I can cut it with a hacksaw, then grind it to the same size, but cutting in on my RAS would be faster and more accurate.
Porta band not a WW bandsaw
![[Image: 4197G2BRZ6L.jpg]](https://images-na.ssl-images-amazon.com/images/I/4197G2BRZ6L.jpg)
12-14 TPI works on this saw
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 40,104
Threads: 0
Joined: Apr 2007
The make a table accessory for the saw Joe posted. I have that saw but the table is another $250 and I haven't come across a deal on one yet
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 1,126
Threads: 0
Joined: Aug 2007
(11-27-2016, 08:27 PM)Roly Wrote: Cutoff wheel on a angle grinder. Roly
+1
"As God is my witness, I thought turkeys could fly!" Arthur 'Big Guy' Carlson
