Posts: 320
Threads: 0
Joined: Dec 2013
Can you provide a bit more on the buffing bonnet sets? Are those 7"?
Posts: 7,985
Threads: 0
Joined: Feb 2007
10" for automotive. they're the craftsman sets readily available from sears.
Posts: 8,143
Threads: 0
Joined: Dec 2004
Location: SW Ohio (Bethel)
PM sent re: PM
Posts: 18,961
Threads: 0
Joined: Jul 2002
Location: Ohio
I don't visit the S&S section often, but popped in a couple of weeks ago and scrolled through this list.
I ended up buying a shop fox cabinet saw from the list. I drove down a day or two after I confirmed I was buying it, and he loaded it on my truck with forks.
Before I finished putting it together the next day, Josh contacted me to let me know he realized there was a mismatch between the fence and rails (it comes in 3 boxes...He has a lot of stuff there!). He went out of his way to make sure everything was made right. In my own business, I know I will make mistakes at some point. My hope is that I am judged less by the mistakes (assuming they are not frequent and caused by gross neglence!) and more by what I do to correct those...
It was very tempting to bring home one of the 60 gallon compressors - new, still on the original pallet...But it took convincing for the table saw (I wouldn't say "permission" from my wife....We settled with: 'will you be mad if I buy it?'...'No') so I didn't figure it wise to spend more money on tools now! But half price!
Posts: 1,218
Threads: 0
Joined: Jan 2007
I have an older shop fox molding machine, and that is a great deal on the W1812 if someone needs one! This is basically a Williams and Hussey clone, and mine was terrific when I did my fancy mahogany paneled living room.
Posts: 18,961
Threads: 0
Joined: Jul 2002
Location: Ohio
(02-09-2017, 11:12 AM)SCMedLion Wrote: I have an older shop fox molding machine, and that is a great deal on the W1812 if someone needs one! This is basically a Williams and Hussey clone, and mine was terrific when I did my fancy mahogany paneled living room.
I just said I DON'T have more tool money to spend now! That is tempting though...maybe even more than the compressor.
Posts: 188
Threads: 0
Joined: Jul 2016
Location: Philadelphia, PA
Josh,
Sent you a PM the other day on the Shop Fox mortiser
Posts: 7,985
Threads: 0
Joined: Feb 2007
Much of this list 50% or so is gone. I'm working on a new list, that will have better detail of the items.
Posts: 898
Threads: 0
Joined: Apr 2005
Buffing bonnets are they still available stand me an email with pics if you will. gwiederman@icloud.com
