Posts: 16,152
Threads: 0
Joined: Dec 2005
It is nice to see US companies change the basis of competition with new products. (this is a product I work on).
http://www.finehomebuilding.com/2017/01/...-abrasives
Posts: 322
Threads: 0
Joined: Feb 2007
Little brother just gave me a couple samples of these grinding and cutting wheels-only tried the cutting wheel-wow, no comparison to others I've used.
Posts: 12,893
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
You work for 3M? They were our largest and generally toughest competitor back in my corporate life. I didn't work on abrasives - which was probably too bad because we were working on another application for a sol gel product and left some solution in a pan overnight. The next day it had dried out and cracked into all these sharp grains. We never thought about using it for abrasives. A few years later I came across a 3M patent for an abrasive grain made by much the same process.
John
Posts: 16,152
Threads: 0
Joined: Dec 2005
I can't tell you if that is what we use or not because I would have to kill you.
You missed a gigantic market by >.< much.
Posts: 12,893
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-23-2017, 05:21 PM)Curlycherry Wrote: I can't tell you if that is what we use or not because I would have to kill you.
You missed a gigantic market by >.< much.
I know - on both counts.
John
Posts: 40,148
Threads: 0
Joined: Apr 2007
I have to get some of those
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 64,732
Threads: 3
Joined: Feb 2007
Location: Merryland
I exclusively use 3M abrasives doing body work, including buffing and polishing compounds and buffing pads. My supplier is constantly trying to get me to use Norton and several other brands of abrasives, compounds and polishes. I'm convinced that I make more money and work faster and more efficiently using the 3M stuff. Same with clear coats. Go high-end or risk a poor looking job.
Posts: 2,540
Threads: 0
Joined: Jul 2007
Location: Long Island, NY
Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
01-24-2017, 09:46 AM
(This post was last modified: 01-24-2017, 09:51 AM by Wild Turkey.)
Going shopping . . .
OK, MSC has them
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
you have a link to the MSC item?