Posts: 15,331
Threads: 0
Joined: Jan 2005
My personal experience: DIY coating suffered hot tire pick-up......commercial coating was done three months, superb results.
This isn't a woodworking group, its a group of mostly imbeciles and retards. FearMonger 8-Feb-2012
If God had a sidearm, it'd be a 1911.
Posts: 127
Threads: 0
Joined: Jan 2005
i just had my garage done, ~800 sqft. company had a propane-powered grinder, ground the whole floor. used "florock" epoxy, all solvent-based, two-part. first did a primer coat, then a thick epoxy coat with chips, then a two-part urethane coat over that with grit. took three days of labor, cost $2400. not something i would do myself.
good luck with your floor.
--- dz
Posts: 1,407
Threads: 2
Joined: Jun 2003
I want to pour a slab under my carport. They want $3000 to do it.
If I do it myself, would it be as good?
Does this answer your question?
If you have the $2K write the check!
