Posts: 139
Threads: 0
Joined: Nov 2001
I'm debating getting the PALS system to help align my mid-90's Craftsman table saw. Just wondering if anyone has experience using the system and what the pros and cons might be. Thanks. Ned
Posts: 1
Threads: 0
Joined: Oct 2013
Ned,
The PALS setup relieves us from the extremely tedious alignment process of "loosen, bump, tighten, then repeat". I put it on my saw after about a month of having it. Works a treat. You can really dial in the blade being parallel to the miter slots.
The only drawback that I have encountered is the studs that you use to replace the trunion bolts are a bit too long and interfere with tilting the blade with the blade guard in place. There's no problem if you don't use the guard or remove it for beveling operations.
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I used a set on a Delta contractor saw I had. I had knocked the saw out of alignment and after 2 days of tedious effort still couldn't get things straightened out. I put the PALS on and had it aligned within .003" in a hour or so. I once heard them described as $1.50 for the hardware, and $20 or so for the idea. True, but it's a great idea.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 2,501
Threads: 0
Joined: Oct 2005
I put one on a Delta contractor saw I had. It was the best $20 I spent on that saw.
"There is no such thing as stupid questions, just stupid people"
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
PALS work, and are cheap at twice the price. I'd always suggest yes, unless you know within a year you are swapping saws.
Worst thing they can do is cook ya and eat ya
GW
Posts: 139
Threads: 0
Joined: Nov 2001
Thanks for all the quick responses. Going to be ordering the system.
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
I had it on my Delta Contractor's Saw. Works as advertised and worth every penny.
Still Learning,
Allan Hill
Posts: 84
Threads: 0
Joined: Oct 2003
Location: North Carolina
Had them on a Delta contractor saw and they worked great. Recommended.
Ed
Posts: 3,524
Threads: 0
Joined: Dec 2003
I have them on my Delta contractor saw that I am now using and they are worth twice what you will pay.
Finishing: I apply shellac before I apply varnish.
Routing:Hand Left to Right, Table right to left
Cutting plywood:Face up on the table saw
Face down w/circular saw.
Wear safety glasses when using power tools.
Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
OK, I looked them up to see what they were.
Now, can someone explain to me how they work & why I need them?
Keep in mine, I'm a hobby woodworker, not a cabinet maker.
