Posts: 584
Threads: 0
Joined: Jul 2004
I turn in my basement. May have to move outside next time I turn Acrylic though. Just wondering if you encounter any "resistance"
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
My shop is my garage. I have enough space in my 3-car garage to park one car, but when I'm working on a project, everything has to be parked outside. That's the only grousing I might get, and usually it's from myself. With two SUVs and one pickup, one car always gets left on the street.
Still Learning,
Allan Hill
Posts: 2,682
Threads: 0
Joined: Mar 2000
Location: Portsmouth, VA
The garage is the shop. Only once has a car been in it and that was during a hurricane and it was empty at the time. Otherwise I would have a tough time squeezing in a bicycle let alone a car.
Posts: 8,205
Threads: 0
Joined: Aug 2002
I was still on active duty with the Air Force when I started turning. Used our one-car garage for a shop.
After retirement, bought a place in the country that had a 30X50 shop. Got lots of room for all eight lathes.
GM
The only tool I have is a lathe. Everything else is an accessory.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Separate building behind the house. The only resistance are the stiff hinges on the old door.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
I also do wood working from my small garage.
I do think next time I get a small mini or midi lathe I might just keep it so when it is nice I can wheel it outside to turn and enjoy the weather.
So far I have given away 5 lathes and only had to buy 2 at discount prices. I am thinking the next time I see the Delta 46-460 on sale I will try to get a few and keep one.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 1,723
Threads: 0
Joined: Aug 2000
Location: Chesterton Indiana
Basement workshop pretty small but I get by.
Posts: 1,548
Threads: 0
Joined: Mar 2006
Detached 24 by 36 shop. I will be building later this year, and stepping up in size. My flat work tools will no longer be covered with turning tools and stuff... My garage is my office...
robo hippy
Posts: 161
Threads: 0
Joined: Jul 2016
Location: Garrett Co. MD. 21550
24 x 48 detached shop. Judy and I share it to do our woodcrafts
Posts: 2,386
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Garage/shop, resistance = 0
"I tried being reasonable..........I didn't like it." Clint Eastwood
