Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
I'm making some slab cabinet doors by gluing shop sawn veneers to a plywood substrate. I'm using Blumotion face frame inset hinges, and a 3/4" thick door will give a 1mm reveal but thicker doors will need a large reveal so the door clears the face frame as it pivots.
The problem is I can only find plywood that is 3/4" or 1/2". 5/8"+ would be ideal. I'm thinking I can just sand down 3/4" ply to the proper thickness so I end up with 3/4". I have a drum sander. I also have a planer with carbide inserts but I don't think running ply through it would be wise.
Anyway, is it a bad idea to sand down plywood? Will it lose its stability if I don't take equal amounts off each side? Is there another way to tackler this?
Thanks,
Paul
Posts: 4,133
Threads: 0
Joined: Oct 2009
Location: Lawrence, KS
(05-29-2017, 09:24 PM)atgcpaul Wrote: I'm making some slab cabinet doors by gluing shop sawn veneers to a plywood substrate. I'm using Blumotion face frame inset hinges, and a 3/4" thick door will give a 1mm reveal but thicker doors will need a large reveal so the door clears the face frame as it pivots.
The problem is I can only find plywood that is 3/4" or 1/2". 5/8"+ would be ideal. I'm thinking I can just sand down 3/4" ply to the proper thickness so I end up with 3/4". I have a drum sander. I also have a planer with carbide inserts but I don't think running ply through it would be wise.
Anyway, is it a bad idea to sand down plywood? Will it lose its stability if I don't take equal amounts off each side? Is there another way to tackler this?
Thanks,
Paul
1) Make your own plywood, consider starting with 1/4" or 3/8" MDF. Then resaw some poplar, also slicing it up so that when you make the skins they are quartersawn. Then add your veneer. This however is a lot of work.
2) Put a slight bevel on the edge next to the hinges so that it continues to clear the frame when opened. If bevel is noticeable (probably not), continue it all the way around the door and make it a feature.
Don't sweat the petty things and don't pet the sweaty things. -- G. Carlin
Posts: 29,152
Threads: 1
Joined: Aug 2002
use 1/2 ply and make thicker veneers or add a layer to each side to get to your core thickness
or use 5/8" mdf for your core
it works just fine no need for plywood
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 589
Threads: 0
Joined: Jan 2017
Location: Marina del Rey
"I can only find plywood that is 3/4" or 1/2"."
Baloney.
Wood is good.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I'd opt for the MDF core, absolutely stable, and dead flat, it's a wonderful substrate to build on. 5/8" is available, as it also is in BB ply. You have no indication of where you live. Having that info it's very possible someone can tell you where to go to get 5/8" material. It's certainly out there.
Worst thing they can do is cook ya and eat ya
GW
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
Looks like I'm taking a little drive. Lumber supplier about 40 minutes away has 5/8" BB. The other HD about 15 minutes away has 5/8" particle board but I don't want to second guess myself that the screws won't hold.
Posts: 29,152
Threads: 1
Joined: Aug 2002
(05-30-2017, 07:15 AM)atgcpaul Wrote: Looks like I'm taking a little drive. Lumber supplier about 40 minutes away has 5/8" BB. The other HD about 15 minutes away has 5/8" particle board but I don't want to second guess myself that the screws won't hold.
MDF and particle board are not the same thing
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 11
Threads: 0
Joined: Dec 2016
I have been warned numerous times about gluing up on a BB so I stayed away and probably glad I did. Particle board is fine, and 5/8" should be readily available in Maryland. No need to worry about the hinge screws holding if you use the proper screws. Every commercial P-lam cabinet that you have ever seen in offices, hospitals, etc most likely has a PB core. Be sure to veneer both sides with similar woods.
Posts: 1,422
Threads: 0
Joined: Dec 2004
05-31-2017, 10:44 AM
(This post was last modified: 05-31-2017, 10:46 AM by Bope.)
Do you have a baltic birch ply supplier. I can get 1/8" to 3/4" in 1/8" increments.
I am not sure I would try sanding down ply to veneer. Even the better furniture ply I can get has some small voids.
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
(05-31-2017, 10:44 AM)Bope Wrote: Do you have a baltic birch ply supplier. I can get 1/8" to 3/4" in 1/8" increments.
I am not sure I would try sanding down ply to veneer. Even the better furniture ply I can get has some small voids.
Already done. I just didn't want to make the drive, but I did it yesterday morning. I wasn't feeling motivated to going into work after the long weekend so I did the 1.5 hr round trip for the 5/8" BB and came in late.
Thanks,
Paul
