04-28-2017, 01:39 PM
(This post was last modified: 05-31-2017, 11:15 AM by gary32.
Edit Reason: lower price
)
Oliver #71 DX Automatic Horizontal Boring Machine, serial #82236 $2,200.00 fob Culver City, CA 90232
Can bore any wood no matter how hard and also non-ferrous metals.
There are 6 receptacles to plug the heads into. There are 5 Oliver heads, 3 single spindle close up heads and (2) 2 spindle geared heads. The left and right side geared heads can slide up and down 3" on their own geared frame independent of the center heads.
5 1/2" capacity under the automatic timed air clamps. 7/8" to 60" between centers. All bits spin @ 3600 rpm. The table with clamped work is stationary the heads move forward.
The forward stroke or bore depth is adjustable from 0 to 3 1/4", the cast iron table is 15" x 60"
(2) large timed Oliver air clamps.
(2) Oliver orbital/staggered adjustment 1.5hp side heads
(2) Oliver intermediate heads, close up type, 3/4 hp 3600rpm
(1) Oliver center head, 3/4 hp 3600 rpm
Every feature and movement is fully adjustable, every Oliver part is there dialed in, works correctly and well maintained. The front mounted controls allow for crawl and run settings for safe and easy set up. You will not find a more flexible Oliver borer or one in better condition. You have the flexibility to perform multiple functions with quick, easy set up for short runs, models and prototyping.
Comes with 16 boring bits.
Ready to power up add air and use for a couple decades, 60"wide, 42"deep, 72" tall, 2,500 lbs, I can load it.
Can bore any wood no matter how hard and also non-ferrous metals.
There are 6 receptacles to plug the heads into. There are 5 Oliver heads, 3 single spindle close up heads and (2) 2 spindle geared heads. The left and right side geared heads can slide up and down 3" on their own geared frame independent of the center heads.
5 1/2" capacity under the automatic timed air clamps. 7/8" to 60" between centers. All bits spin @ 3600 rpm. The table with clamped work is stationary the heads move forward.
The forward stroke or bore depth is adjustable from 0 to 3 1/4", the cast iron table is 15" x 60"
(2) large timed Oliver air clamps.
(2) Oliver orbital/staggered adjustment 1.5hp side heads
(2) Oliver intermediate heads, close up type, 3/4 hp 3600rpm
(1) Oliver center head, 3/4 hp 3600 rpm
Every feature and movement is fully adjustable, every Oliver part is there dialed in, works correctly and well maintained. The front mounted controls allow for crawl and run settings for safe and easy set up. You will not find a more flexible Oliver borer or one in better condition. You have the flexibility to perform multiple functions with quick, easy set up for short runs, models and prototyping.
Comes with 16 boring bits.
Ready to power up add air and use for a couple decades, 60"wide, 42"deep, 72" tall, 2,500 lbs, I can load it.