Posts: 2,036
Threads: 0
Joined: Jan 2003
I have less than a half gallon of Cabot Semi Transparent oil base deck stain. I need a little more than a half gallon to cover it. I also have a partial gallon of Cabot Solid color oil base deck stain. Do you think I will have problems if I add some of the solid color to the semi transparent so I have enough to cover the deck.? I know it will change the transparency a bit.
I must admit I called Cabot's 800 number and the person immediately said not to do it but didn't explain why. I also know they are in the business of selling, not stretching some existing sale.
What are your thoughts? I am cheap, and don't want to waste or purchase more if I don't have to. This is an older deck that I've maintained fairly well, I at one time used solid color and eventually it peeled, so last year I stripped it and used the semi transparent and it's working fine. I don't think adding a little of the solid to the transparent will cause any issues
Opinions appreciated.
Thanks
Posts: 19,048
Threads: 0
Joined: Jul 2002
Location: Ohio
Why not just add a little thinner?
Posts: 2,036
Threads: 0
Joined: Jan 2003
I thought about adding more thinner, but the semi transparent is already pretty thin. Maybe add some solid and some thinner and hope to get the same result?
Posts: 999
Threads: 0
Joined: Apr 2001
Location: South West Pa.
Someone said "If its worthwhile doing then do it right." Buy a gallon, you'll be happy in the long run you did.
Regards,
Bill Bob
Posts: 4,667
Threads: 0
Joined: Jan 2008
maybe do a test with a couple tsp's of each.
and let us know how it turns out,please.
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
my mom used to mix paints herself. The outcomes were awful most of the time. One thing I expect you to mess up doing this is the adhesion. I swear she wasted so much money on paint that she could have bought whatever she wanted. Even Habitat charges real money for opened paint.
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I looked at what Cabot calls the "technical data" of the 2 (?) products. The question mark is because I may have looked at the wrong 2, they have 3 series in each (semi and solid) and I could rule out the acrylic, but that still left me with 2 oil based versions. One thing I noticed (the comparisons are very similar) was that the solid color is considered a film forming finish (2-3 mils) and the semi is not, it's considered a penetrating finish. I think the worse that would happen is you would mix them and get a thin penetrating finish with a thin film finish on top. Of course that's all a guess, and the only way to know is to try it. But I don't think using it the way you want would be a huge disaster, it just might not work quite as well as 100% of one type.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 2,036
Threads: 0
Joined: Jan 2003
I added a little solid color, and a little thinner. I'll try to post the results next year. It did seem to soak into the wood which is what I was going for. The deck must be 20 years old now. I might replace some year with a man made product. Problem is I built it 16" on center and I think most of the man made products need 12" oc. The best news is that both the railing and deck is redone so I can relax on them now.
Thanks for the comments.
