Carbide Turning Tools for sale

[jaustin]

Rougher 15mm x100mm (4") radius on 1/2" x 1/2" square 304 stainless steel 9" long with 2 " tang
Rougher 15mm x100mm (4") radius on 1/2 round tool steel bar


Finisher 16 mm round mounted on 1/2" square tool steel
Finisher 16 mm round mounted on 1/2" round tool steel

Finisher 12mm Round 3/8 x 3/8 stainless steel bar 9" long. 2" tang
Finisher 12mm Round 3/8 round stainless steel 9" long


Diamond Detailer 3/8 x 3/8 stainless steel bar 9" long. 2" tang
Diamond Detailer 3/8 x 3/8 round stainless steel bar 9" long. 2" tang


The Mini Rougher, Mini finisher and the Mini Detailer are made with 3/8 304 stainless steel.

They measure 6" long with a 2" tang.
Round version will also be available.

Mini Rougher
Mini Finisher
Mini Diamond Detailer


Aluminium 3/8 or 1/2" mounting hole

Vega Pro Lathe Duplicator Diamond Shaped Carbide Cutter $70 shipped
Bar measures Approx 4" long
.625 diameter
.585 flat top to bottom side.

Vega Midi Lathe Duplicator Diamond Shaped Carbide Cutter $65 Shipped
Bar measures Approx 2.125" long
.440 diameter
.400 flat top to bottom side.



Rougher on 1/2" Stainless steel square bar $26plus shipping
Rougher on 1/2" Stainless steel bar $26plus shipping

Finisher 16mm on 1/2" Stainless steel bar $31plus shipping
Finisher 16mm on 1/2" Round Stainless steel bar $31 plus shipping

Finisher 12 mm round on 3/8 Stainless steel bar $28 plus shipping
Finisher 12 mm round on 3/8" Round Stainless steel bar $28plus shipping

Diamond detailer on 3/8 Stainless steel bar $32 plus shipping
Diamond detailer on 3/8 Round Stainless steel bar $32 plus shipping


Diamond Detailer 1/2" Stainless steel bar$34plus shipping
Diamond Detailer 1/2" Round Stainless steel bar $34plus shipping


Mini Rougher $223/8 Square stainless plus shipping
Mini finisher $24 plus shipping
Mini Detailer $28 plus shipping

Vega Pro Lathe Duplicator Diamond Shaped Carbide Cutter
Vega Midi Lathe DuplicatorDiamond Shaped Carbide Cutter

Aluminum Handles 3/8 or 1/2" x 12" long $35 plus shipping



I do have replacement inserts:
$5.50 each:
15mm x 15mmx 2"r (50mm)
15mm x 15mmx 4"r (100mm)
15mm x 15mmx 6"r (150mm)
15mm x 15mmx square
Mini Sq Rougher insert 10.5mm x 10.5mm
Mini Rougher insert 11mm x 11mm x r2"/50mm

16mm $10.50
12mm $9
Diamond detailer $9.5

Shipping on the inserts is $.75 each max $3 first class mail if you want tracking that will additional.
If you buy one of the turning tools and extra inserts at the same time there is no extra for the shipping the inserts.




Custom lengths are available.

   

   

   

   

   

   

   

   

   

   

[jaustin]

Continue of photos:

   

   

   

   

[Arlin Eastman]

Hey John

It is almost time for me to get more carbide cutters from you soon.  You did a great job on making them and now more options to.

[jcredding]

John - Still really enjoying the tools. Any plans to make a parting tool? Thanks, John

[jaustin]

Glad you all are liking the tools,
I have looked at trying to do parting tools but its never gone anywhere.
I probably will need to upgrade my mill before I try to do some.
Hopefully I can do that next year.

[Arlin Eastman]

Also hope you get the hollowing tools with longer necks done to.

[jaustin]

I had to give up on them. Couldn't figure out a good way to bend the necks repeatedly.
Maybe in the future I can work on them again

[Angus]

I can vouch for John's tools. My turning is rougher on an edge than most. The quality is top notch.

[Arlin Eastman]

I had to give up on them. Couldn't figure out a good way to bend the necks repeatedly.
Maybe in the future I can work on them again

John

If you found a 1" up to 2" thick piece of steel and heat up the metal you can bend it over the metal I talked about.
Also if I find a Oxy/Acy welder I would do the bending for you.

[jaustin]

No problem in bending it but making them all the same time after time is my problem.