09-15-2017, 10:19 PM
(This post was last modified: 09-19-2017, 03:31 PM by greatscott.)
For sale is several Ulmia planes along with an ECE plane and some chisels. I did some research on pricing through eBay so I hope there's some good deals to be had here. If my descriptions on any of the planes are wrong, please let me know as some of these planes were hard to figure out. I have not done any restoration to the planes so I'll leave that up to the buyers discretion. I'm located in Peoria, AZ and buyer pays actual shipping cost. You can pay via Paypal or through check/money order.
Ulmia bench plane (?) - Plane has 1858 Two Cherries Plane blade, blade is 41mm wide, length of plane is 240mm. $30 - https://flic.kr/s/aHsm7RqUC1
Ulmia fillister plane - I'm not certain this is a Ulmia plane. It's stamped 33 on the back of the blade and I can't make out the marking on the front but I included large format pictures so maybe someone can decipher it. SOLD - https://flic.kr/s/aHsm7RrdFL
Ulmia 30mm rabbet plane - I did not disassemble the blade from the plane so sorry about that. Stamped 30mm on the back of the plane. $20 - https://flic.kr/s/aHsm559yi8
Ulmia/Ulmer 45mm smoothing plane - Blade and back of plane are stamped 48mm. Blade is actually double-stamped. $35 - https://flic.kr/s/aHsm55atui
Ulmia 45mm plane – Plane is stamped 45mm on the back and there is an 1858 two cherries logo on the blade. Has adjustable mouth. $35 - https://flic.kr/s/aHsm8Pb3Zz
Ulmia 33mm scrub plane - Plane has 33mm stamped on the back of the plane, Ulmia logo stamped on the blade. $35 - https://flic.kr/s/aHsm55bAcp
Ulmia 48mm bench plane – Marke OTT stamped on the toothed blade. 48mm stamped on the back of the plane. Front of plane is worn down a bit from being wedged in a tool chest slot. $35 - https://flic.kr/s/aHsm8PbsCg
Ulmia 60mm jointer plane - Stamped 60mm on the front and back of the plane. Ulmia OTT stamped on the blade. $75 - https://flic.kr/s/aHsm2U91G7
Ulmia shorter jointer plane - I don't know if this is indeed an Ulmia plane but it's identical (but shorter) to the other jointer but there is no markings on the front or back. There is a Guss Stahl 1858 Two Cherries Plane blade and lever cap. $60 - https://flic.kr/s/aHsm59QtAE
ECE Jack Plane No 103-S 48 - Front of plane was cut a bit to fit into a tool chest slot. Back of plane is stamped 103S48. Blade has 48 stamped on it and also has what appears to be an angel stamped on it. $50 - https://flic.kr/s/aHsm8Pbx9a
Lot of 7 chisels. From left to right: First two planes are marked Jernbolaget Eskilstuna Schweden. Sized at 25mm and 20mm. Next is marked Marke 2 cherries which is 16mm. The last 4 chisels are Ulmia chisels (marked on handle). Sizes are 10, 8, 5 and 3. (Note: I had to do a inches to mm conversion so I hope I got all the mm numbers correct). Asking $50 for the lot. https://flic.kr/s/aHsm8Q5M8t
I also still have the Powermatic mortisiting jig available, if anyone is interested. Will sell for $110 shipped. If you need a picture, it's on the other thread I created.
Ulmia bench plane (?) - Plane has 1858 Two Cherries Plane blade, blade is 41mm wide, length of plane is 240mm. $30 - https://flic.kr/s/aHsm7RqUC1
Ulmia fillister plane - I'm not certain this is a Ulmia plane. It's stamped 33 on the back of the blade and I can't make out the marking on the front but I included large format pictures so maybe someone can decipher it. SOLD - https://flic.kr/s/aHsm7RrdFL
Ulmia 30mm rabbet plane - I did not disassemble the blade from the plane so sorry about that. Stamped 30mm on the back of the plane. $20 - https://flic.kr/s/aHsm559yi8
Ulmia/Ulmer 45mm smoothing plane - Blade and back of plane are stamped 48mm. Blade is actually double-stamped. $35 - https://flic.kr/s/aHsm55atui
Ulmia 45mm plane – Plane is stamped 45mm on the back and there is an 1858 two cherries logo on the blade. Has adjustable mouth. $35 - https://flic.kr/s/aHsm8Pb3Zz
Ulmia 33mm scrub plane - Plane has 33mm stamped on the back of the plane, Ulmia logo stamped on the blade. $35 - https://flic.kr/s/aHsm55bAcp
Ulmia 48mm bench plane – Marke OTT stamped on the toothed blade. 48mm stamped on the back of the plane. Front of plane is worn down a bit from being wedged in a tool chest slot. $35 - https://flic.kr/s/aHsm8PbsCg
Ulmia 60mm jointer plane - Stamped 60mm on the front and back of the plane. Ulmia OTT stamped on the blade. $75 - https://flic.kr/s/aHsm2U91G7
Ulmia shorter jointer plane - I don't know if this is indeed an Ulmia plane but it's identical (but shorter) to the other jointer but there is no markings on the front or back. There is a Guss Stahl 1858 Two Cherries Plane blade and lever cap. $60 - https://flic.kr/s/aHsm59QtAE
ECE Jack Plane No 103-S 48 - Front of plane was cut a bit to fit into a tool chest slot. Back of plane is stamped 103S48. Blade has 48 stamped on it and also has what appears to be an angel stamped on it. $50 - https://flic.kr/s/aHsm8Pbx9a
Lot of 7 chisels. From left to right: First two planes are marked Jernbolaget Eskilstuna Schweden. Sized at 25mm and 20mm. Next is marked Marke 2 cherries which is 16mm. The last 4 chisels are Ulmia chisels (marked on handle). Sizes are 10, 8, 5 and 3. (Note: I had to do a inches to mm conversion so I hope I got all the mm numbers correct). Asking $50 for the lot. https://flic.kr/s/aHsm8Q5M8t
I also still have the Powermatic mortisiting jig available, if anyone is interested. Will sell for $110 shipped. If you need a picture, it's on the other thread I created.