10-23-2017, 08:28 PM
I had a piece of spalted beech that was heavily spalted, despite that it was still pretty solid. Made one ornament with walnut and one with maple.
![[Image: pVUIDdjnkZhl5MeQbZj0AAY9VFZnXMjm8gmeTCtD...85-h643-no]](https://lh3.googleusercontent.com/pVUIDdjnkZhl5MeQbZj0AAY9VFZnXMjm8gmeTCtDRjFNumV0-SehTAOS0Rtn0hTpd8Lz2LUEgyqXbEpJxRtz4YViGSoxeuEG4KblagOwzrUTRHtD3QlYDF8ryYpRuvG72KllBOYpVlRomOeZ05VquvYMDGjsJtjms0XRf5waTODiK28YTgjcC9wHZre__Lt3i9UxR1XqY4g6uBqw_Njl3WyX0K_RNFvDQgv3twmUSX682gKUhK_PM08TOwQaaG-F2UTzlsu4E148xKd-U56OQxm4ZbAOXGckGOrDWPrRJ3_YeMijMKhBkfeEaTtdwgKqBXbZqXsm-9IlF2LEHdYKB_p7IX6p7Se9Ik_tdBEw03kWOcYfQxm_D5P-VvqZuAnovuh076PQ87yZIeUlN4pxJPFfV7RKvKODZyNos-wjFmebLsRaEaCcMASUkMYOGkizxtKGozX8rn4fjjMmYQTESpBQw7pJu0Gfbtx3wFBtcciFR86KqNfl6rnz4n-rpLFy5A2sR2xTr302iW7TLJfdQqOlkLoWB0-gZHQnWmoswKjpUuifMMsG3bglxSwg5gz74hSL2J_ZPvnwolhd4RLV0tyvig39vFY7FBYW2Z259w=w1085-h643-no)
![[Image: nf6mjwlTtobHX3jXSr-sjKqPBzLxTvkp5c8g6HQh...80-h643-no]](https://lh3.googleusercontent.com/nf6mjwlTtobHX3jXSr-sjKqPBzLxTvkp5c8g6HQhQOUokZuqw4x5Ry_Q4EKRAiowU57vOzxZbbiZfiy-_1PdYJc5Eje9JTgtwW4tuUOVYHCBlCOQVbewKPHDGErwjGPS7zsO8zBhkrRBrScd3SzWv5oeqTPyPB9dmPnyl_Hv_KisI4aTxpyKK8D18_sIcsQXpUctGjcC6FoA4R3oqhKEZVIq5fbmphKgaFcoHP0MvnYSQpG8TPIMG7coLRFdCOktevgV0MxHaubHjgvGss1HxKO4cpQ6t6tqNuT1LyQAc3FmdKueWtXdf_7FlDz4v5Tz9xYv0gC9VFiU2VYDR85MZCAz2FrkFMtgRA9dwS5-tdwtzzubofqp5Zf_zVUkEqKTBW3z07DMBiIrhfJ6NB1DYckhkCMeqf7P3maZ_U-cYq58DRSE3TJwXndPJRTbr944u9ZTWJHq4yjmm8I1sM-b5PI0eV-6MzHcX8EVSkQLIdvnGRJKI0-v2B8lK49K0xgmdolvqrlkD7M9x0dE5WKZ6TfMZ5QX2B8j3Ozrh9ijgHItl7WdECICSfBmMUstUZI8nIR56_R-4UZb8MLqCz65_gnTv2e9iOKG4t4xEfsXig=w980-h643-no)
Steve K
|
A couple ornaments
|
10-24-2017, 07:56 AM
Those deserve a "WOW",well done.Beautiful work.
Mel
ABC(Anything But Crapsman)club member
10-24-2017, 04:28 PM
Very nice indeed!
What is the finish? 
10-24-2017, 05:37 PM
Steve
Another job well done buddy. I forgot what you use to hollow them with?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing. 
10-24-2017, 06:19 PM
Lovely ornaments, Steve. What is the approximate size and where do you get the eyelets?
Still Learning,
Allan Hill
10-24-2017, 06:49 PM
(10-24-2017, 04:28 PM)Dusty Workshop Wrote: Very nice indeed! Thanks, 2 seal coats of shellac, sanded and top coated with Target coatings EM6000 water borne lacquer.
Steve K
10-24-2017, 06:51 PM
(10-24-2017, 06:19 PM)AHill Wrote: Lovely ornaments, Steve. What is the approximate size and where do you get the eyelets? Thank you sir, my globes are usually 2" diameter or less. Overall length is around 5". I get the eyelets from http://www.woodworkingparts.com/
Steve K
10-24-2017, 06:54 PM
(10-24-2017, 05:37 PM)Arlin Eastman Wrote: Steve Thanks Arlin I use some home made hollowing tools. 5/16" round bar from the local hardware and 8.8mm carbide inserts from captain eddie.
Steve K
|
|
|
Users browsing this thread: 3 Guest(s)