Posts: 5,119
Threads: 12
Joined: Apr 2009
Location: SoMar
I need a inexpensive anti-fatigue floor mat about 3' X 5' or so.
I have arthritis pretty bad in my joints, and my shop is only 58*F
this time of year, with a heater going 24/7.
I don't want to have to wear my good Red Wing boots to turn at my lathe, so I need a mat.
I have tried those cheap interlocking play mats the kids nap on, ain't worth bringing home.
Any help is greatly appreciated.
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
You can double up on Harbor Freight mats.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 194
Threads: 1
Joined: Jul 2016
Location: WI
I use these,
https://www.woodcraft.com/products/anti-...veled-edge , and like them. I also have the Rockler ones but prefer the Woodcraft over those.
Posts: 313
Threads: 5
Joined: Jul 2016
I've been using horse stall mats with good results (though be warned they are sturdy in case you are looking for soft). Buy them in 4 x 8 and I've cut them in half. As you might imagine, given intended use, they hold up pretty well also.
Posts: 2,274
Threads: 90
Joined: Jun 2001
I bought the HF ones years ago. With the abuse I give them they have held up just fine.
The biggest problem is when you want to vacuum - they want to lift up. Of course they will happen with all those mats.
John
Always use the right tool for the job.
We need to clean house.
Posts: 887
Threads: 0
Joined: Sep 2009
Location: Carlisle, PA
(11-26-2017, 04:54 PM)Herb G Wrote: I need a inexpensive anti-fatigue floor mat about 3' X 5' or so.
I have arthritis pretty bad in my joints, and my shop is only 58*F
this time of year, with a heater going 24/7.
I don't want to have to wear my good Red Wing boots to turn at my lathe, so I need a mat.
I have tried those cheap interlocking play mats the kids nap on, ain't worth bringing home.
Any help is greatly appreciated.
Head over to the Tractor Supply and pick up a stall mat.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Go to the box store and buy the cheap 45 cent a yard low pile carpet and get a thin carpet pad if you like and cut it to fit around your working areas. You can cover the whole area and might spend less than for mats. I have no problems cleaning up with a broom and shop vac and my feet don't hurt any more.
I do have a couple of HF mats- very light weight, but are ok.
![[Image: Dac7XfC.jpg]](https://i.imgur.com/Dac7XfC.jpg)
Posts: 7,421
Threads: 1
Joined: Sep 2005
(11-26-2017, 05:51 PM)jcredding Wrote: I've been using horse stall mats with good results (though be warned they are sturdy in case you are looking for soft). Buy them in 4 x 8 and I've cut them in half. As you might imagine, given intended use, they hold up pretty well also.
Me too. I got them in linking tiles. They are twice as thick as the ones found elsewhere.
Making riser of sub-floor plywood over 1" x 2" stringers will add significantly to the effectiveness of any anti-fatigue mat.
No animals were injured or killed in the production of this post.
