02-06-2018, 10:55 AM
(This post was last modified: 02-06-2018, 10:56 AM by rschissler.)
What methods do you guys use to mount them to the drill press table? Preferably, something that is easy to remove and set up.
Recommend a Drill Press Vise?
|
02-06-2018, 10:55 AM
(This post was last modified: 02-06-2018, 10:56 AM by rschissler.)
What methods do you guys use to mount them to the drill press table? Preferably, something that is easy to remove and set up.
02-06-2018, 11:19 AM
"What methods do you guys use to mount them to the drill press table? Preferably, something that is easy to remove and set up."
In my case, , I remove the usual flat, slotted table from the support arm and replace it with an adapter I got from Grizzly. The adapter fits into the support arm of the drill press and the cross slide vise is mounted on top of it. Works great. I can swap them out in a minute.
Mark Singleton
Bene vivendo est optimum vindictae The Laws of Physics do not care about your Politics - Me
02-06-2018, 04:39 PM
I like the looks of this one from Northern Tool and Equipment. At 23 pounds it should stay put. And it offers two axis fine adjustment.
https://www.northerntool.com/shop/tools/..._200659538
No animals were injured or killed in the production of this post.
02-06-2018, 11:36 PM
(02-06-2018, 04:39 PM)Cooler Wrote: I like the looks of this one from Northern Tool and Equipment. At 23 pounds it should stay put. And it offers two axis fine adjustment. Looks nice but the reviews aren't very stellar. DT
02-07-2018, 01:18 PM
(02-06-2018, 11:36 PM)Tapper Wrote: Looks nice but the reviews aren't very stellar. At 23 lbs for $79 they had to have taken some shortcuts. I never thought about weight in one of these but heft does sound like a good design parameter in any tool not to be carried in an apron.
A carpenter's house is never done.
02-08-2018, 08:32 AM
(02-06-2018, 11:36 PM)Tapper Wrote: Looks nice but the reviews aren't very stellar. I would not over-think a vise. Find one that meets your needs. Even the shabbiest will probably work fine.
No animals were injured or killed in the production of this post.
02-09-2018, 01:55 PM
(02-02-2018, 06:47 PM)Bibliophile 13 Wrote: I'm in the market for a decent vise for my drill press. I pretty regularly need to bore accurate holes in small-ish workpieces (both wood and plastic), and I'm getting tired of clamping makeshift fences to my wobbly drill press table. I need a dedicated drill press vise that allows for accurate positioning on both the X- and Y-axes. The ability to add non-marring jaws would be a big plus. This guy loves his. http://carlford.info/blog/2017/10/drill-press-vise/
logroll in pinehurst nc
02-09-2018, 06:35 PM
(02-09-2018, 01:55 PM)logroll Wrote: This guy loves his.
Steve
Mo. I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24 The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints WaterlooMark 02/9/2020
02-09-2018, 11:40 PM
I have a cheap one from Harbor Freight that had a lot of slop as received, but was easily adjusted to be much better than more expensive ones that were not so adjusted. I'm not saying you should buy a cheap vise. I am saying you should check the adjustment of whatever you get.
02-10-2018, 01:27 AM
I have a Palmgren and a Jacob both are good the Jacob isn't in the same league as the Palmgren but works just the same and can be found on Ebay for about $100 or a bit more
the one above is on Ebay not mine https://www.ebay.com/i/253277815947?chn=ps&fl=a
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around. |
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.