Posts: 1,688
Threads: 0
Joined: Oct 2001
Almost done with my new WB (top, actually). Applied 2 layers of tung oil, want to finish it with something harder. Oil based varnish? Other ideas?
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Posts: 22,682
Threads: 0
Joined: Oct 2007
Location: Burlington, North Carolina
(02-08-2018, 08:20 PM)Scouter Wrote: Almost done with my new WB (top, actually). Applied 2 layers of tung oil, want to finish it with something harder. Oil based varnish? Other ideas?
My idea, sorry, is to not do it.
I like a penetrating finish for the bench that keeps water, glue, oil, finishes, and other things penetrate the wood but I still want the feel and friction of the grain at the surface.
A harder topcoat will limit friction and make my work slip around more. It's also more difficult to repair and replenish.
My $0.02
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
I agree with Peter, as will most, I think.
A bench top is designed to take abuse.
Semper fi,
Brad
Posts: 5,163
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Yup, leave it raw wood.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 10,761
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
It's done now.........
Ed
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
What Peter said. I like the same mineral oil and parafin finish that is used on cutting boards.
John
Posts: 1,688
Threads: 0
Joined: Oct 2001
Okay, majority (unanimity?) wins. thanks.
Mike
I work on the 50-50-90 rule: If there's a 50-50 choice, I'll pick the wrong one 90% of the time!
Posts: 917
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
Late to the party as usual. I also agree with Peter. I finished my bench top with tung oil 10 years ago. I applied a bunch of coats - don't recall how many now - and waxed it after the oil cured. It has been a superb finish. Nothing sticks to it. It is tough and doesn't chip or flake off. I reapply wax occasionally and it reconditions the tung oil finish. My bench top needs a resurfacing, but it's not the finish that's the problem. I've just beat it up over the years. When I resurface it I will reapply a tung oil finish.
Posts: 16,549
Threads: 2
Joined: Oct 1999
(02-08-2018, 08:20 PM)Scouter Wrote: Almost done with my new WB (top, actually). Applied 2 layers of tung oil, want to finish it with something harder. Oil based varnish? Other ideas?
Piling on - tung oil again! It's what I used when I built the European bench featured in Woodsmith #50. Has held up nicely but like others have mentioned, after years of use needs touchup and some more tung oil.
Doug
Posts: 675
Threads: 0
Joined: Aug 2011
(02-08-2018, 08:20 PM)Scouter Wrote: Almost done with my new WB (top, actually). Applied 2 layers of tung oil, want to finish it with something harder. Oil based varnish? Other ideas?
Is it real tung oil, or a tung oil
finish? The latter could be a thinned (wiping) varnish or an oil-varnish blend, or something else entirely.
