Woodnet Forums › › Active › Woodworking v
Daily Bench Shot
Thread Modes
Daily Bench Shot
Redman Offline
Member
Posts: 3,733
Threads: 1
Joined: Apr 2008
#121
02-11-2018, 10:44 AM
(02-11-2018, 09:46 AM)GlenS Wrote: I'm going to rip thin strips of Poplar & Cherry. Glue & bend them around the jig/form to form the apron for the 1/2 round table. The notches are for the clamps. Wish me luck!! LOL

I'll be waxing the TS soon myself. Especially with Spring coming here in Ohio & an unheated garage.

Kewl and good luck with the bending and glueing.
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Find
Reply
Stwood_ Offline
Member
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
#122
02-11-2018, 12:27 PM
(02-11-2018, 09:19 AM)GlenS Wrote: Here's what is on my bench. It's a pile of yet to be determined lumber & a jig I made up. I think the Cherry on the bottom will be a small 1/2rd table for beside the recliner.


[Image: 20180210_154920_zpsc26fqfji.jpg]


Cool
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
Stwood_ Offline
Member
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
#123
02-11-2018, 06:32 PM
   

Had to dig out my last NOS porter cable BN200A nail gun, as another one quit today. My guns are all high mileage, and I need to get 4-5 kits and rebuild several of them.

The BN200A and BN125 is no longer made, sadly.  Some of their best guns before all the tool co. buyouts.
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
Redman Offline
Member
Posts: 3,733
Threads: 1
Joined: Apr 2008
#124
02-11-2018, 07:02 PM
(02-11-2018, 06:32 PM)Stwood_ Wrote: Had to dig out my last NOS porter cable BN200A nail gun, as another one quit today. My guns are all high mileage, and I need to get 4-5 kits and rebuild several of them.

The BN200A and BN125 is no longer made, sadly.  Some of their best guns before all the tool co. buyouts.

Cloth boxes?
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Find
Reply
Stwood_ Offline
Member
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
#125
02-11-2018, 07:47 PM
Cloth covered, yes.
Steve

Mo.


I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24


 
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020








Find
Reply
rick4212 Offline
#1 Papa
Posts: 965
Threads: 0
Joined: Sep 2004
#126
02-11-2018, 11:43 PM
10 dinning chairs


Attached Files Image(s)
   

There are two theories to arguing with a woman... neither works.


My stuff
Website Find
Reply
GlenS Offline
Member
Posts: 127
Threads: 0
Joined: Jan 2018
#127
02-12-2018, 07:52 AM
Thanks Redman!! It'll be an adventure I'm sure!!

Rick-- Those are gonna be some very nice chairs!! Can't wait to see the finished ensemble!!
Find
Reply
Redman Offline
Member
Posts: 3,733
Threads: 1
Joined: Apr 2008
#128
02-12-2018, 10:45 AM
(02-11-2018, 11:43 PM)rick4212 Wrote: 10 dinning chairs

Ok I give up is that a table saw, shaper, router table or something else under the dust collector?
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Find
Reply
rick4212 Offline
#1 Papa
Posts: 965
Threads: 0
Joined: Sep 2004
#129
02-12-2018, 11:17 AM
Reman wrote:
Ok I give up is that a table saw, shaper, router table or something else under the dust collector?

Table saw. My work bench and table saw (really everything) is the same height which makes everything a lot easier in a small shop like mine.

There are two theories to arguing with a woman... neither works.


My stuff
Website Find
Reply
Redman Offline
Member
Posts: 3,733
Threads: 1
Joined: Apr 2008
#130
02-12-2018, 11:42 AM
(02-12-2018, 11:17 AM)rick4212 Wrote: Reman wrote:
Ok I give up is that a table saw, shaper, router table or something else under the dust collector?

Table saw. My work bench and table saw (really everything) is the same height which makes everything a lot easier in a small shop like mine.

Someday I'll build a ramp for my saw, it's 6" higher than everything else. They built the floor too close to my arse.
Laugh
There is no such thing as too much horsepower, free lunch or spare change ~ anonymous

87% of people say their mental health is good to excellent. The rest are sane enough to know they are lying. ~ anonymous
Find
Reply


Forum Jump:


Users browsing this thread: 49 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.