Posts: 1,392
Threads: 24
Joined: Aug 2001
04-18-2018, 10:04 AM
(This post was last modified: 04-18-2018, 10:05 AM by Dumb_Polack.)
Hi,
Daughter wants bunk beds. I have plenty of cherry and hard maple, but she wants it white. Ain't no way I'm using cherry or maple since it'll be painted.
So i'm thinking popular since it take to paint well. Is it strong enough to support the upper bunk?
Dumber than I appear
Posts: 14,928
Threads: 0
Joined: Sep 2004
Location: Butler, PA
(04-18-2018, 10:04 AM)Dumb_Polack Wrote: Hi,
Daughter wants bunk beds. I have plenty of cherry and hard maple, but she wants it white. Ain't no way I'm using cherry or maple since it'll be painted.
So i'm thinking popular since it take to paint well. Is it strong enough to support the upper bunk?
I've seen them made out of pine, so I would presume poplar would be plenty strong enough. Much depends on how you build them.
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
Posts: 1,150
Threads: 0
Joined: Nov 2006
Location: Texas - Gods Country
I built mine for the boys from 2x4 and 2x6. We wrestle and jump off the top all the time.
Posts: 1,407
Threads: 2
Joined: Jun 2003
Poplar is a popular wood for paint.
Posts: 951
Threads: 0
Joined: Mar 2007
04-18-2018, 10:43 AM
(This post was last modified: 04-18-2018, 06:36 PM by overland.)
It depends on the design, I suppose. I built one out of pine boards from Home Depot, and it was very sturdy--much better than most commercial versions. I imagine poplar would be fine.
Posts: 9,459
Threads: 0
Joined: Dec 2004
Poplar is harder than pine and would be prefered over pine imo.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 12,871
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
If you want a smooth finish without a lot of extra work, maple would be a far better choice. It's the wood I use most often for anything painted. It's also a lot harder and won't dent as easily as poplar.
John
Posts: 3,182
Threads: 0
Joined: Sep 2004
Location: Piedmont North Carolina
(04-18-2018, 12:50 PM)jteneyck Wrote: If you want a smooth finish without a lot of extra work, maple would be a far better choice. It's the wood I use most often for anything painted. It's also a lot harder and won't dent as easily as poplar.
John
Now poplar is a 'hardwood' w/ good but not the best strength stats - see
HERE for some interesting comparison charts of both hard and soft woods - poplar should be fine and does paint well but agree w/ John, the more expensive hardwoods may be more durable, but for a girl, I'm assuming the beds will not be much abused? Dave
Piedmont North Carolina
Posts: 13,411
Threads: 4
Joined: Jun 2007
Location: New Jersey
(04-18-2018, 12:50 PM)jteneyck Wrote: If you want a smooth finish without a lot of extra work, maple would be a far better choice. It's the wood I use most often for anything painted. It's also a lot harder and won't dent as easily as poplar.
John
Paint grade soft maple is not much more expensive than poplar ($2.60 vs $1.80 for poplar on Wall Lumber site) but that being said, with the proper design poplar would be ok.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 849
Threads: 0
Joined: Jul 2006
I built my Grand Daughter's bed from poplar
Princess bed with turned spindles 7 feet high (done in sections as lathe only does 44")
Head board and foot board from patterns I drew in CAD
rails for base and top with bed hardware
Primed and painted white
Had an artist paint fairy scenes
Clear coat over
She's 10 now - poplar has held up well and was good to work with
