Posts: 7,421
Threads: 1
Joined: Sep 2005
I'm pretty sure that no matter how carefully I plan my cuts from sheets of plywood that I am not optimizing the available square footage.
Is there a program where I can enter the sizes of plywood I need (and grain direction) and it will tell me how many sheets of plywood I need and show the cutting diagram?
I'm planning on building all new cabinets for my kitchen and the errors will mount up to significant dollars.
No animals were injured or killed in the production of this post.
Posts: 10,279
Threads: 1
Joined: Nov 2001
Location: Prince Frederick, MD
04-27-2018, 01:21 PM
(This post was last modified: 04-27-2018, 01:22 PM by ®smpr_fi_mac®.)
I don't know of a phone app, but Sketchup on a PC will do this for you.
Semper fi,
Brad
Posts: 6,442
Threads: 0
Joined: Feb 2006
(04-27-2018, 01:14 PM)Cooler Wrote: I'm pretty sure that no matter how carefully I plan my cuts from sheets of plywood that I am not optimizing the available square footage.
Is there a program where I can enter the sizes of plywood I need (and grain direction) and it will tell me how many sheets of plywood I need and show the cutting diagram?
I'm planning on building all new cabinets for my kitchen and the errors will mount up to significant dollars.
CutList is designed to do just that.
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
04-27-2018, 03:14 PM
(This post was last modified: 04-27-2018, 03:14 PM by joe1086.)
When I did my kitchen I used CutList. Did everything you asked, but I think it's a bit spendy now, $89. There look to be several alternative options for desktop or mobile apps.
Posts: 7,421
Threads: 1
Joined: Sep 2005
Thanks. I’ll check it out.
Cooler
No animals were injured or killed in the production of this post.
Posts: 144
Threads: 0
Joined: Jan 2007
(04-27-2018, 04:08 PM)Cooler Wrote: Thanks. I’ll check it out.
Cooler
Used an earlier version of this and it worked fine. He has latter version and it is still I believe is free.
http://delphiforfun.org/Programs/cutlist.htm
Bob
Posts: 676
Threads: 2
Joined: Jan 2007
I use Sketchup too. I’ve used Cutlist before but it was free then. But most of the time I just make components - so one component is the plywood sheet, the other components are the size of the parts. Copy the comments as necessary and play with them on the sheet component to see how they fit best. Works good.
Posts: 7,421
Threads: 1
Joined: Sep 2005
I looked at it now on my tablet. When I get home I will try to download it on my laptop.
Thanks.
No animals were injured or killed in the production of this post.
Posts: 12,870
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
The Cut List Extension I use in SketchUp is free. Of course, if you don't use SketchUp to draw your cabinet and all it's components it's of no use. Also, the default orientation of parts is the length is oriented in the long direction of the sheet. Normally, that's OK, but not always, and I can't find any way to change it.
Back when I built my kitchen I took my Lotus 1-2-3 generated list of parts and laid them out on 8-1/2 x 11" paper with 4 x 8' scaled rectangles drawn on them. I had 27 cabinets, and maybe it took an hour or two. For a one off kitchen I wouldn't pay money for a Cut List program.
John
Posts: 21,871
Threads: 0
Joined: Oct 2003
For two hours, you probably pay for your time—now it’s there for any future projects.
There’s more than one way to look at the cost.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
