Posts: 24,334
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
04-28-2018, 03:43 PM
Okay, got the floor.
I'd like to seal it (or whatever) so spills, overspray, drips, drops, oops, etc will be easy to clean up.
What does the brain trust suggest?
How soon can it be applied?
I'd like to do it before I start covering it up with tools, benches, etc
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 5,236
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Epoxy.
Number one best thing I ever did in my garage and wood shop.
https://www.epoxy-coat.com/
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 5,236
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Oh, and before the inevitable 'slippery when wet" post,
there are lots of products to spray on in areas where
that might be a concern. Or, you can add grit to the
epoxy.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 14,846
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
I would check with the manufacturer of whatever you decide to use, but I have always heard it takes 30 days for cement to be considered cured. Yes, I know it never fully cures
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Yup what they said. I would make a few calls and see what a professional epoxy coater would charge. The stuff used in hangers etc is far superior to the stuff you buy but the consumer stuff isn't awful. It's the grinding and acid prep that make the home owner stuff last.
As for the concrete yeah 7 days to reach full strength and longer before the moisture content goes down enough to coat it.
Posts: 1,187
Threads: 0
Joined: Dec 2009
Location: Grand Rapids, Minnesota
Find a spot out of direct sunlight and duct tape a piece of plastic down and let sit overnight, if you find condensation under the plastic repeat until it comes up dry. Usually 30+ days.
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
(04-28-2018, 03:43 PM)Wild Turkey Wrote: Okay, got the floor.
I'd like to seal it (or whatever) so spills, overspray, drips, drops, oops, etc will be easy to clean up.
What does the brain trust suggest?
How soon can it be applied?
I'd like to do it before I start covering it up with tools, benches, etc
If you spray paint something with no tarp underneath, that seems to do it.
Posts: 4,794
Threads: 0
Joined: Jun 2003
(04-28-2018, 03:43 PM)Wild Turkey Wrote: Okay, got the floor.
I'd like to seal it (or whatever) so spills, overspray, drips, drops, oops, etc will be easy to clean up.
What does the brain trust suggest?
How soon can it be applied?
I'd like to do it before I start covering it up with tools, benches, etc
I'd recommend two products. The first is called Foundation Armor L3000 lithium silicate hardener.. It helps harden the upper portion of the concrete. After that, professional epoxy is an awesome product. No regrets on spending that money.
Shame on the men who can court exemption from present trouble and expense at the price of their own posterity's liberty! - Samuel Adams