Knock down hardware source?

[Cooler]

https://www.mcfeelys.com/screw-fastener-...iture.html

In lots of 100 or 1,000

[®smpr_fi_mac®]

I only need a dozen of them for a knock-down cradle. I don't want to use the cross dowels so I'll install threaded inserts.

Thanks!

[Gary G™]

This album https://goo.gl/photos/a644AkpToEunQobNA
shows how I used these bolts and the threaded inserts in building a crib.
Several of the pictures demonstrate useful techniques for installing the threaded inserts perfectly square and true.

[®smpr_fi_mac®]

This album https://goo.gl/photos/a644AkpToEunQobNA
shows how I used these bolts and the threaded inserts in building a crib.
Several of the pictures demonstrate useful techniques for installing the threaded inserts perfectly square and true.

Yup. I did much the same thing when I built the 3-n-1 crib/day bed that Rockler had years ago. That's where I got the idea of using these for the cradle I'm building. It had just been so long that I couldn't remember what they were called.

[tocws2002]

Did you buy these yet? If not, I'm 99% sure I have the bolts and threaded inserts you're looking for. I can snap some pics tomorrow and, if they are what you need, send them on their way to you.

-jason

[®smpr_fi_mac®]

Thanks, Jason, but I bought them last week. I appreciate it!