Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
05-30-2018, 11:51 AM
(This post was last modified: 05-30-2018, 11:56 AM by Aram.)
For a 12" high tension hacksaw, Starrett blades or Lenox blades? Or is it a toss-up? I mostly use them for cutting brass stock (1/8" up to 1/2" or less), and occasional pieces of O1 steel, not very thick.
Thanks!
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 261
Threads: 0
Joined: Mar 2005
I use Lenox and they work for me. I have not tried Starrett so don't know what I am missing there.
Posts: 4,333
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
Starrett and Lennox would be equal in my opinion, and I would not bother with any other brands, like Stanley or Ridgid. I'm talking about what is out there at convenient stores; not specialty stuff that may come from someone like McMaster-Carr. None of them seem to last very long, regardless of brand.
Posts: 2,385
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Lennox is my first choice.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 2,772
Threads: 0
Joined: Oct 2012
Location: W. of Rainier, E. of Orcas
I get decent mileage from bi-metal blades. At least I can't remember when I put them on the frame.
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
Thanks, everyone.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(05-30-2018, 07:18 PM)hbmcc Wrote: I get decent mileage from bi-metal blades. At least I can't remember when I put them on the frame.
+1
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 4,333
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
(05-30-2018, 09:36 PM)Stwood_ Wrote: +1
Slightly off-topic, but how do you guys cut spring steel ( for saw plates and card scrapers)?
Posts: 844
Threads: 0
Joined: Aug 2014
(05-31-2018, 09:02 AM)Mike Brady Wrote: Slightly off-topic, but how do you guys cut spring steel ( for saw plates and card scrapers)?
Very wastefully, on my part !
Seriously, I should be getting a shear or something one day.
Most times, I chain-drill holes about 1" apart along a marked line. Then I fold/fatigue along the line until I have separate pieces. Then I take them to either a manual grinder wheel or a powered strip sander (along with draw-filing).
Chris
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(05-31-2018, 09:02 AM)Mike Brady Wrote: Slightly off-topic, but how do you guys cut spring steel ( for saw plates and card scrapers)?
I cut card scrapers with tin snips and a lot of arm cramps. It's not fun and it leaves an ugly burr, but I'm usually cutting curves. I don't know how else I would do that.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
