Posts: 1,804
Threads: 0
Joined: Feb 2004
Location: Buckingham Township, PA
I need to wire up a power cord for a Hammer A3-31 jointer/planer. It’s 4hp, 19amp, according the machine tag. Is there any reason I can’t use a 10/3 extension cord, cut off the ends and replace them with a NEMA 6-30 plug? The extension cords are much less expensive than buying just 10/3 wire.
Jason
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
It should be 300V rated or better. And FWIW, 12-gauge cord of common construction (SO, SJO, and a host of others) with two current-carrying conductors is rated 25A.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 13,412
Threads: 4
Joined: Jun 2007
Location: New Jersey
I've noticed that a 12ga extension cord is indeed cheaper than the wire alone, and have done exactly what you suggest for my 3hp equipment; going good after 20 years...... 4hp should not make a material difference.
Oh, and by the way, TDKPE is da man on such subjects.....
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I did the extension cord (short) thing on my 4hp bandsaw.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
