Posts: 5,421
Threads: 0
Joined: Jun 2001
Location: Troy IL
06-16-2018, 09:42 AM
(This post was last modified: 03-21-2020, 02:30 PM by Woodshop.)
I made piggy banks for my grand sons and my newest great nephew. Made a snug wedge fit for the two half's so they can be opened, Started with a 4" block ended up about 3-3/4 round and from 4-1/2" to 5-1/2 " long each one 1/2" longer, Made of cherry with oil polly finish. takes a bit of time. Probably will give them out at Christmas.
fun turning
, now My wife wants one
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Posts: 18,483
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Alright, those are spectacular.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(06-16-2018, 10:01 AM)Phil Thien Wrote: Alright, those are spectacular.
That is Cute and nicely done to Don. How did you do the tails and ears?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 5,421
Threads: 0
Joined: Jun 2001
Location: Troy IL
06-16-2018, 04:18 PM
(This post was last modified: 06-16-2018, 04:19 PM by Woodshop.)
(06-16-2018, 11:38 AM)Arlin Eastman Wrote: That is Cute and nicely done to Don. How did you do the tails and ears?
Thanks
For the tail I turned a 3/4 to 5/8 " dowel, round off the end/ sand corners off and cut off about 3/16 thick . took a scrap piece of 1/4" ply and sticky taped the disk flat side down on it. draw the curly on it and cut out the inside curve on bandsaw. clean up with dremel.
The ears, you turn a cone and sand,( looks like a bullet point) leave it attached to the block for a handle, split it in half on bandsaw then cut it off. take it to spindle sander and curve out the inside taking more off the thicker base than the tip. A 3/4 " spindle works great for that
that's how I did it.
Don
Life is what you make of it, change your thinking, change your life!
Don's woodshop
Posts: 21,878
Threads: 0
Joined: Oct 2003
Those are great; really cute.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(06-16-2018, 04:18 PM)Woodshop Wrote: Thanks
For the tail I turned a 3/4 to 5/8 " dowel, round off the end/ sand corners off and cut off about 3/16 thick . took a scrap piece of 1/4" ply and sticky taped the disk flat side down on it. draw the curly on it and cut out the inside curve on bandsaw. clean up with dremel.
The ears, you turn a cone and sand,( looks like a bullet point) leave it attached to the block for a handle, split it in half on bandsaw then cut it off. take it to spindle sander and curve out the inside taking more off the thicker base than the tip. A 3/4 " spindle works great for that
that's how I did it.
Don
You know I keep forgetting how much can be done off of the lathe also.
I guess I keep thinking one dimensional.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
Very nice,you are going to have some very happy kiddies.
Mel
ABC(Anything But Crapsman)club member
Posts: 771
Threads: 0
Joined: Jan 2011
Location: Cincinnati
(06-16-2018, 09:42 AM)Woodshop Wrote: I made piggy banks for my grand sons and my newest great nephew. Made a snug wedge fit for the two half's so they can be opened, Started with a 4" block ended up about 3-3/4 round and from 4-1/2" to 5-1/2 " long each one 1/2" longer, Made of cherry with oil polly finish. takes a bit of time. Probably will give them out at Christmas.
fun turning
, now My wife wants one
I like how you think. Nice work!
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 314
Threads: 0
Joined: Feb 2012
Location: Carson Valley, NV
Those are outstanding.
I like how you oriented the grain so it gives the piggies balance.
How did you do the lips, mouth and eyes?
