Posts: 21,884
Threads: 0
Joined: Oct 2003
Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 22,127
Threads: 1
Joined: Aug 2006
Location: In a strange land
I am not in a position to be of any help, but I can suggest you try the
San Diego Fine Woodworkers Association Craftsman List.
See if you can find a skills and reasonable location match on that list.
Posts: 124,052
Threads: 2
Joined: Mar 2002
Location: Port St Lucie, FL
(07-06-2018, 08:36 PM)Gary G™ Wrote: Anyone in the Escondido, CA area want to make some reasonable money to help finish a project?
It basically amounts to making 16 half lap joints in 2 X 4’s: 2 stiles about 45” long and 4 rails about 7’ long.
Must be square and tight.
Thanks,
Gary
You can do those from anywhere... bundle'm up and UPS'em out there
fred@kingstonco.com
Posts: 21,884
Threads: 0
Joined: Oct 2003
The material is already here though.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 36,547
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(07-07-2018, 04:57 PM)Gary G™ Wrote: The material is already here though.
I thought you were in Florida. You don't own a circular saw and a chisel? I've also done what you want with a handsaw, though that would take longer.
Posts: 21,884
Threads: 0
Joined: Oct 2003
My SIL didn’t have tools; we went shopping.
I’ve done 23 half lap joints—9 to go.
Most were done with circular saw, chisel and rasps.
We borrowed a router and I’m banging but it’s still hot—yesterday was 108; it’s only 102 right now!
This is me:
http://lumberjocks.com/projects/385721
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 21,884
Threads: 0
Joined: Oct 2003
07-10-2018, 07:43 PM
(This post was last modified: 07-10-2018, 07:43 PM by Gary G™.)
Still looking for someone who can complete 4 easy sets of half lap joints in Escondido.
Anyone know someone who wants to make a couple hundred dollars for a few hours work?
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 19,160
Threads: 0
Joined: Sep 2003
Small set of chisels, circular saw, and Amazon Prime?
-brew
Posts: 21,884
Threads: 0
Joined: Oct 2003
Don’t understand your reply?!?j
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 19,160
Threads: 0
Joined: Sep 2003
If SIL doesn't have the tools, maybe send some his way so he can do the work...
-brew
