Posts: 1,228
Threads: 0
Joined: Jun 2006
This first one I call "Swirl" The biggest challenge was figuring out the matching radius on each segment.
The second one is made from scraps from the first one. In the first one, each piece is cut on a taper and the cutoffs were used to make the second one.
All comments, both positive and negative are welcome.
There is a fine line between woodworking and insanity - sometimes I am not sure which side of the line I am on.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
#2 is kinda neat and different
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,084
Threads: 0
Joined: Mar 2006
(07-07-2018, 12:40 PM)BigD Wrote: This first one I call "Swirl" The biggest challenge was figuring out the matching radius on each segment.
The second one is made from scraps from the first one. In the first one, each piece is cut on a taper and the cutoffs were used to make the second one.
All comments, both positive and negative are welcome.
Very nice Awesome.
Posts: 3,182
Threads: 0
Joined: Sep 2004
Location: Piedmont North Carolina
Well done and fun to look at - congrats!
Dave
Piedmont North Carolina
Posts: 2,391
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
BigD, you are so creative!!!!!!!!! Your cutting boards are ALWAYS true pieces of art. Thank you for sharing.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 18,615
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
Posts: 3,755
Threads: 0
Joined: Dec 2006
Location: SW Pa.
Alice in cutting board land . sweet.
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 9,565
Threads: 0
Joined: Jan 2005
Location: Orlando FL
That must have been an interesting glue up.
I like both of them.
