attaching wood to acrylic
#18
myself, i would use what ive used to attach plywood scrollsaw work to acrylic a few times- medium CA glue.
Reply
#19
(07-27-2018, 07:42 AM)tomsteve Wrote: myself, i would use what ive used to attach plywood scrollsaw work to acrylic a few times- medium CA glue.

A pretty  good article about CA glue.  Moisture is required for a cure.

https://www.hotmelt.com/blogs/blog/what-...ylate-glue
No animals were injured or killed in the production of this post.
Reply
#20
(07-27-2018, 07:37 AM)Cooler Wrote: You still have expansion and contraction due to the temperature.  
Sorry, I didn't consider them.  Not that they're significant in this context. 
General info: https://www.engineersedge.com/materials/..._13165.htm


The Wood Handbook pertaining to temperature and  dimension. https://www.fpl.fs.fed.us/documnts/fplgt...gtr113.htm  A great resource for experimentally valid data.

I don't consider either to be flawed.
Better to follow the leader than the pack. Less to step in.
Reply
#21
Thanks for all the info.  I picked up a tube of E6000, I think it will work prefect for what I need.

George
Reply
#22
(07-26-2018, 06:23 PM)Gary G™ Wrote: The OP said 1/8” ply.
I doubt you’ll rabbit it.

E6000.

I missed that.

He could put it between two pieces of wood tho and seal around the edges
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#23
(07-26-2018, 08:55 PM)daddo Wrote: Brush on some Elmers white glue, press and squeeze it out- seal the sides.

I've done it on a smaller scale- But if your project is larger and the ply expands more or less than the plastic (and it will), it could cause problems.

It would be better free floating.

I am thinking any white or yellow glue is bad for the outside elements.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification.  Thank You Everyone.

It is always the right time, to do the right thing.
Reply
#24
(07-27-2018, 01:38 PM)Arlin Eastman Wrote: I am thinking any white or yellow glue is bad for the outside elements.

 He said it would be outside but not in the weather. As long as it is sealed around the edges and not in the rain, it won't get wet. White Elmers turns into a clear hard rubbery film when dry as you know and makes a great film between glass and plastics.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.