Posts: 22,222
Threads: 0
Joined: Nov 2002
09-17-2018, 07:38 PM
(This post was last modified: 09-17-2018, 07:42 PM by Edwin Hackleman.)
(09-16-2018, 07:19 PM)Stwood_ Wrote: If using side mount slides, I always built the boxes 1" less height than the cabinet opening
I have no idea why you would ever need that much clearance between the drawer box and the frame opening, especially if the slides mount on the sides of the box. About 1/4" is all I ever needed. 3/8" might be more common.
Rip to width. Plane to thickness. Cut to length. Join.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(09-17-2018, 07:38 PM)Edwin Hackleman Wrote: I have no idea why you would ever need that much clearance between the drawer box and the frame opening, especially if the slides mount on the sides of the box. About 1/4" is all I ever needed. 3/8" might be more common.
Well, the drawer box has to lift**UP* and set into the attached slides inside the cabinet Ed
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,407
Threads: 2
Joined: Jun 2003
(09-17-2018, 07:45 PM)Stwood_ Wrote: Well, the drawer box has to lift**UP* and set into the attached slides inside the cabinet Ed
Apples and oranges you both are correct.
Ed is talking about ball bearing extension slides.
Stwood is talking about standard epoxy coated drop in slides.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(09-19-2018, 08:45 AM)rwe2156 Wrote: Apples and oranges you both are correct.
Ed is talking about ball bearing extension slides.
Stwood is talking about standard epoxy coated drop in slides.
Ed did not elaborate nor say anything about slide type.
Ed just opened his mouth.....
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 22,222
Threads: 0
Joined: Nov 2002
09-19-2018, 07:13 PM
(This post was last modified: 09-19-2018, 07:15 PM by Edwin Hackleman.)
(09-19-2018, 09:29 AM)Stwood_ Wrote: Ed did not elaborate nor say anything about slide type.
Ed just opened his mouth.....
I guess so. Anything wrong with that? I've been using ball bearing slides for nearly 20 years. I've also built my own slides with hardwood and still never needed more than 1/4" clearance between the drawer box and the face frame. They still work today. Once in awhile I add a little wax to those.
Rip to width. Plane to thickness. Cut to length. Join.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(09-19-2018, 07:13 PM)Edwin Hackleman Wrote: I guess so. Anything wrong with that? I've been using ball bearing slides for nearly 20 years. I've also built my own slides with hardwood and still never needed more than 1/4" clearance between the drawer box and the face frame. They still work today. Once in awhile I add a little wax to those.
Absolutely nothing wrong with that Ed.
Just don't sneeze.
Yes I understand the clearances for BB slides. After building probably 10,000 drawers with different combo's along the way. 1/4" is fine for BB slides.
I did refer to Euro side mount slides. Thus the *needed* 1" clearance, so you can get the box in the hole.
Hey how is your chainsaw polishing going? It's about time to fire up for firewood season.
I'll probably be starting in about a month.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 22,222
Threads: 0
Joined: Nov 2002
09-20-2018, 01:56 PM
(This post was last modified: 09-20-2018, 02:07 PM by Edwin Hackleman.)
Rip to width. Plane to thickness. Cut to length. Join.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Sweet. Put that pic over in my workbench thread...
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 22,222
Threads: 0
Joined: Nov 2002
(09-20-2018, 04:20 PM)Stwood_ Wrote: Sweet. Put that pic over in my workbench thread...
No nails in this bench anywhere. Ir's all made with quartersawn oak, except of course for the back panel where I hang chainsaw bars, chains, and other parts. It took me about 9 months to build this bench. Much of the original idea came from a ShopNotes issue that was published in issue 75, about 14 years ago. The drawer units and the back hutch that also lights it up was my original design. I think those were improvements.
Frankly speaking, I love this workbench and use it daily. It's as strong as an ox.
Rip to width. Plane to thickness. Cut to length. Join.
