Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
10-12-2018, 07:06 PM
A couple weeks ago I was perusing through the "tools for sale" section of Craigslist and stumbled upon a Porter Cable OmniJig. I called the seller and he still had it, so I set a time to come take a look. I handed the gentleman what he was asking for it without a thought to haggle. I figure he had about $800 invested with the jig, dust shroud, accessory case and a few extra stops & collars.
![[Image: aqOueb5.jpg]](https://i.imgur.com/aqOueb5.jpg)
All of it for $200...
His advice was to find a place to leave it mounted so I wouldn't have to move it around. I understood exactly where he was coming from as this is one heavy jig! I'm working on a cabinet to mount it to, so I can roll it out of the way when not in use. I'll post some pics of that when it's done...
Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 14,791
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
Hope the po-po don’t come looking for you!
Posts: 13,415
Threads: 4
Joined: Jun 2007
Location: New Jersey
I'll be the first, you suck! Nice find.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Nice find ..................
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 3,755
Threads: 0
Joined: Dec 2006
Location: SW Pa.
If it can't kill you it probably ain't no good. Better living through chemicals.
Posts: 2,772
Threads: 0
Joined: Oct 2012
Location: W. of Rainier, E. of Orcas
Nice shop, Dave! That is your shop, isn't it? I think all we have seen on your aggregater is the foundation work.
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
(10-13-2018, 09:30 PM)hbmcc Wrote: Nice shop, Dave! That is your shop, isn't it? I think all we have seen on your aggregater is the foundation work.
Yes, that's my shop. not sure where you've seen pics, but it has been completed for a few years now. Try looking
here...
And I'll gladly accept all the suckage comments. I don't get many opportunities to hear them...
Thanks, Guys!
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 16,644
Threads: 2
Joined: Oct 1999
Nice going on the jig - shop nothing short of spectacular!!!
Doug
Posts: 30,422
Threads: 1
Joined: Dec 2002
Location: IL or NC <coin toss>
That deserves a
![[Image: bill-murray-you-suck.jpg]](http://www.cianperez.com/photos/d/6722-1/bill-murray-you-suck.jpg)
Posts: 454
Threads: 0
Joined: Apr 2007
