We are working on a jobsite where the general contractor is gutting the entire suite in a 3 story commercial building. The superintendent knows I do wood working and called me and told me to come help myself to the raised paneling, fluted casings, chair rail moldings, door casing, shelving and baseboard trim before they start tearing everything out and throwing it into dumpsters. 2 hours later I ended up with a truck bed full of this stuff but I'm not sure what type of wood it is.
I wet this piece down with water and took some pictures. I also sanded the surface to see if stain was applied to the back side of the trim board and there wasn't any on there so this is the natural color.
(11-28-2018, 05:10 PM)tomsteve Wrote: nice lookin lumber! how old is the building? looks like the african mahogany in the pic on wood datat base only with a finish on it. quite like this:
The building is 30 years old but the previous tenant did the remodel about 6-7 years ago.
This was the largest piece I acquired...it was at their front entry desk. 10' long and 40" tall.
You might go on line and take a look at Iroko also known as African Teak. Iroko varies in color but yours has a grain and color similar to some I have in my shop. It's a dense, heavy wood that has an oily feel to it. Just a thought.
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
