Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
12-08-2018, 02:44 PM
(This post was last modified: 12-09-2018, 04:06 PM by Big Dave.)
Hi, guys
I'm working from the WOOD Mag plans for a set of TV trays. I'm at the point where I was assembling them before the glue up and I've run into a bit of a problem. They seem a little short. Overall height from floor to top is only about 25".
Does anyone here have a set of TV trays where they could grab a couple measurements for me? What I'm looking for is the overall height when set up, the length of the legs, and the position of the pivot point from the top of the legs. I'd like to have something to compare them to before I do the final glue-up....
Thanks, Guys!
Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
We have some I made that get daily use. The top is 24.5" from the floor, the legs are 26.5" long, and the pivot point is 15" from the bottom of the legs. Works very well for us. I think the plan I used was from Wood, but I made them so many years ago I can't remember.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 805
Threads: 0
Joined: Feb 2003
Location: Land of Enchantment
I have a nicer store-bought set that I bought quite a few years ago.
Top from floor: 27-1/2"
Legs: 29"
Pivot from top: 14"
I also have a couple of cheaper ones that are smaller and not as tall...I don't like using them as much.
Bob
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
I use a cheap metal lap tray with some cartoon design on it because it works in the recliner. Many times I've felt poorly about not making some 'good ones'.
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
Thanks, guys!
There isn't a whole lot of difference between the two, so now it looks like I need to decide if I want to make new legs...
Thanks again!
Dave
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
We have these, in natural, with the stand.
https://www.bedbathandbeyond.com/store/p...lsrc=aw.ds
26" high, which is just right. FYI.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 21,962
Threads: 0
Joined: Oct 2003
Link to a set I built; made up my own plans:
http://lumberjocks.com/projects/24583
They’re about 26-1/2” to the top when open.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 6,755
Threads: 0
Joined: Aug 2001
Location: Post Falls, ID
"One should respect public opinion insofar as is necessary to avoid starvation and keep out of prison, but anything that goes beyond this is voluntary submission to an unnecessary tyrany, and is likely to interfere with happiness in all kinds of ways."
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Oh, wow! Those are really nice.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 11,743
Threads: 0
Joined: Jan 2005
Location: North Central Illinois
![[Image: m0SiEC5.jpg]](https://i.imgur.com/m0SiEC5.jpg)
![[Image: rVFRhDb.jpg]](https://i.imgur.com/rVFRhDb.jpg)
![[Image: xgw5fqm.jpg]](https://i.imgur.com/xgw5fqm.jpg)
![[Image: VvZS4PW.jpg]](https://i.imgur.com/VvZS4PW.jpg)
![[Image: fis5IhM.jpg]](https://i.imgur.com/fis5IhM.jpg)
