Tools for sale, mostly hand tools

[msweig]

Time to thin the herd of various things I rarely/never use, or really don't need.

Prices listed do not include shipping.  Shipping will be from 77007.  I have the rough weight of the item in the listing, so add a pound for packaging, and that should give you an idea of what shipping will cost (planning on using USPS).  Once you say I'll take it I will pick a box, pack it, and can give you a shipping cost.  But there are enough things here that I don't want to take the time to prepack everything, and then be opening stuff up and repacking if people want multiple things.  There is enough here it might take multiple posts.  Also, I haven't been keeping up with prices, so some of these could be crazy.  Feel free to let me know I'm nuts.

We will start with planes and related.

LV Left Hand Skew Rabbet Plane.  Barely, if ever, been used.  $190, weighs roughly 3.5 pounds
[attachment=15741]
[attachment=15742]
[attachment=15743]

SOLD Stanley 192.  Missing several parts (like the depth stop.  And the tightening screw is obviously not original.  At least I hope). SOLD $8 plus shipping, weighs roughly 1.75 pounds
[attachment=15744]
[attachment=15745]

SOLD Beater block plane.  Modern POS, except I did all the flatten sole, tune it, etc. so it works.  But is still isn't in the same league as LV/LN.  But if you want a beater block that works way better than just buying one at the store here ya go.  SOLD $2 plus shipping, weighs roughly 1.5 pounds
[attachment=15746]

Hot Dog attachment for LV Bevel Up Jack.  Made by Derek Cohen.  Works well, but I now have a shooting plane so I don't need it anymore.  $50 + shipping, weighs about a 0.25 pounds.
[attachment=15747]

SOLD LV Beading Tool.  I practically never use this, so no point in keeping it.  Great shape.  SOLD $45 plus shipping, weighs a little over 2 pounds
[attachment=15748]

[msweig]

Next we have chisels

SOLD Ashley Iles Roundback/Dovetail set.  1/4, 3/8, 1/2, 3/4, and 1".  Great condition, I just never find myself using them much.  The backs have been flattened, and most are sharp (one or two might need touched up).  SOLD $120 plus shipping, weigh about 1 pound.
[attachment=15749]
[attachment=15750]

SOLD 3/8" Ashley Iles American Pattern Bevel Edge chisel.  Good shape, back has been flattened.  SOLD $20 plus shipping, weighs about 0.25 pounds
[attachment=15751]
[attachment=15752]

1/2" Stanley 720.  Good shape, back has been flattened.  $25 plus shipping, weighs about 0.25 pounds
[attachment=15753]
[attachment=15754]

SOLD  1/4" Union Manufacturing chisel.  Good shape, back has been flattened.  SOLD  $15 plus shipping, weighs about 0.25 pounds.
[attachment=15755]
[attachment=15756]
[attachment=15757]

SOLD Not sure what to call this.  It is kinda like a skew chisel, except it is beveled on both sides, so more like a knife.  Helpful for getting into tight corners when you need to slice just a bit more off.  SOLD $3 plus shipping, weighs about 2 ounces.
[attachment=15758]

Still more coming...

[msweig]

Now we get to the hodgepog of stuff

First we have an old coping saw.  I can't quite make out the manufacturer.  $10 plus shipping, weighs about 0.5 pounds
[attachment=15759]
[attachment=15760]


  SOLD  Next some French made (apparently according to the box) Gimlets.  I'm not sure I've actually ever used these.  SOLD   $6 plus shipping, weighs about 6 oz.
[attachment=15761]

SOLD Marples Mortise/marking gauge.  Two pins on one side, one on the other.  SOLD $7 plus shipping, weighs about 0.25 pounds.
[attachment=15762]

  SOLD   3 Squares.  Never really use these anymore.  SOLD  $25 plus shipping, weighs about 1.75 pounds.
[attachment=15764]
[attachment=15765]

Knife guide for sharpening kitchen knives.  Never even been opened.  $5 plus shipping, weighs a 2 oz.
[attachment=15766]

SOLD   Transfer punch set.  These are handy.  SOLD   $5 plus shipping, weighs about 3.5 pounds.
[attachment=15767]

SOLD Rockler/Insty Drive Self Centering Bit set.  SOLD $15 plus shipping, weighs about 6 oz.
[attachment=15763]

One more post...

[msweig]

Build a Dutch Tool Chest DVD.  $22 plus shipping, weighs about 3 ounces.
[attachment=15768]

SOLD Making Things Work.  SOLD $10 plus shipping, weighs almost a pound.
[attachment=15769]

SOLD Laser tape measure.  Given to me by someone.  And rarely used.  SOLD $1 plus shipping, weighs about 6oz.
[attachment=15770]

And last of all an 8" slow speed grinder.  $40. I'm not shipping this, you will need to come pick this up (I live in central Houston).  I'm 99% sure I put one of the Norton 3X wheels on the left side.  I also took a wing nut and added a handle to it to make it easier to adjust the tool rest, which I also flattened.  There is some rust on the tool rest, but should be easy to remove.  Only reason I'm getting rid of this is I upgraded to a 6" grinder.
[attachment=15771]
[attachment=15772]

Let me know if you have any questions. 

Mark

[enjuneer]

PM sent on transfer punches and Nancy Hiller book.

[AUswimKC]

On sent for a few things

[johndi]

PM sent for squares

[msweig]

Sold so far (pending me packaging everything up and getting payment):

block plane, laser tape, Union 1/4" chisel, gimlets, squares,transfer punches, book


I'm about to make dinner and get kiddos to bed, so I will likely not be responding for an hour or two.

Mark

[CharlesinSEA]

PM sent on AI roundbacks, skew chisel, and beading tool. Offer sent on the DVD.

[msweig]

AI roundbacks, skew chisel thingy, and beading tool are spoken for.