Posts: 1,028
Threads: 0
Joined: Apr 2011
I’ve gone cheap on these and while they self closed they were not soft and snap the drawer shut. This is for my kitchen so these will get a lot of use and abuse, so I need ones that will perform well and last under such conditions.
Obviously there’s lots of options out there for SOFT-self closing drawer slides. Which ones have you found to be best?
Thanks
Ray
Ray
Posts: 2,082
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
Blum, under mount. Best I've seen.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 1,028
Threads: 0
Joined: Apr 2011
Well I’m already set for side mount, but I’ll check to see what they have.
Ray
Posts: 1,555
Threads: 0
Joined: Dec 2004
Location: Sumner Co, Tn
(01-27-2019, 06:43 PM)museumguy Wrote: Blum, under mount. Best I've seen.
My answer is the same - although I'm sure I have much less experience with other brands because I took the advice on this site to use Blum. They are indeed excellent and if you build the drawer to the space specs required - easy to install.
Joel
USN (Corpsman) 1968-1972
USAF Retired Aug 31, 1994
Santa Rosa County, Fl Retired Jun 1, 2012
Now just a hobbiest enjoying woodworking!
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Blum slides are very good, maybe the best. But I've had very good luck with KV as well.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 10,777
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
Posts: 3,535
Threads: 0
Joined: May 2005
Location: Greater Fort Collins Area, CO
Blum, Grass, Hettich are all decent. Though I tend to stick w/ Blum as I have the jigs for their stuff (hole drilling, etc.)
https://www.wwhardware.com/drawer-door-s...awer-slide
Michael
Every day find time to appreciate life. It is far too short and 'things' happen. RIP Willem
Posts: 12,888
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-27-2019, 07:30 PM)DogwoodTales Wrote: Well I’m already set for side mount, but I’ll check to see what they have.
KV 8455FM Soft-Close Full Extension with Overtravel Drawer Slides work very well.
John
Posts: 9
Threads: 0
Joined: May 2005
(01-28-2019, 12:59 PM)jteneyck Wrote: KV 8455FM Soft-Close Full Extension with Overtravel Drawer Slides work very well.
John
Blum, undermount, in use for 2 years now, work great, I also used blum soft close hinges also quality hinge. I do not have experience with other brands.
Posts: 1,028
Threads: 0
Joined: Apr 2011
02-03-2019, 07:57 PM
(This post was last modified: 02-03-2019, 07:58 PM by DogwoodTales.)
Thanks to all
I have some 15 sets of Blum sides on order and, thanks to the recommendations above, I have a feeling of confidence in the order and am looking forward to the anticipated quality.
When I’m ready for them I will look at their hinges first.
Ray
