Posts: 215
Threads: 1
Joined: Sep 2010
Location: Great Black Swamp
I have a Ridgid thickness planer TP1300 which works very good for what I need it for. The height adjustment is slipping as I feed in boards. I've looked at it and cleaned it up, but still seems to slip. Is there a part in there that is worn that needs replacement? I also need to change the knives. Maybe dull knives could be causing the problem. Thanks in advance for your help. PS, where is a place to get good knives? I know in the past there have been suggestions post here, but I can't remember the details.
Jim
Posts: 8,386
Threads: 1
Joined: Mar 2000
My Delta benchtop will slip out of adjustment when the knives are sufficiently dull. The resistance from the dull blades overcomes the friction fit of the clamping mechanism on the lock bars and will force the cutterhead upward.
Posts: 21,879
Threads: 0
Joined: Oct 2003
It’s your dull knives.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,969
Threads: 0
Joined: May 2007
(05-27-2019, 12:00 PM)NWOhioJim Wrote: I have a Ridgid thickness planer TP1300 which works very good for what I need it for. The height adjustment is slipping as I feed in boards. I've looked at it and cleaned it up, but still seems to slip. Is there a part in there that is worn that needs replacement? I also need to change the knives. Maybe dull knives could be causing the problem. Thanks in advance for your help. PS, where is a place to get good knives? I know in the past there have been suggestions post here, but I can't remember the details.
Jim
Would recommend Holbren for the knives.
WoodTinker
