Posts: 64,660
Threads: 3
Joined: Feb 2007
Location: Merryland
06-29-2019, 07:49 PM
(This post was last modified: 06-29-2019, 07:51 PM by Snipe Hunter.)
I just ordered flooring for the dining area, kitchen, living room and entry hall. 3-1/4"w natural oak. I'm waffling between running it left to right or up and down or both. If I install it up and down, it would look good in the entry hall but wouldn't run the long length of of kitchen/dining area because it would run the short distance between the walls. If I ran it lengthwise in the kitchen/dining area, I perceive it would look better in those rooms, including the living room. Does this make sense? Would it look odd running the entry hall up and down and the other rooms lengthwise. <- That's my plan for now unless you talk me off the cliff.
This area is the area in question.
![[Image: 8NahDKV.jpg]](https://i.imgur.com/8NahDKV.jpg)
Posts: 22,324
Threads: 0
Joined: Dec 2005
Location: Oakdale, MN
06-29-2019, 08:10 PM
(This post was last modified: 06-29-2019, 08:18 PM by packerguy®.)
Id run the entry north/south and the rest east/west putting a threshold (or transition, whatever you wanna call it) at the entry to the living, and the entry at the dining room at top of entry.
Once Favre hangs it up though, it years of cellar dwelling for the Pack. (Geoff 12-18-07)
Posts: 4,444
Threads: 0
Joined: Jan 2005
(06-29-2019, 07:49 PM)Snipe Hunter Wrote: I just ordered flooring for the dining area, kitchen, living room and entry hall. 3-1/4"w natural oak. I'm waffling between running it left to right or up and down or both. If I install it up and down, it would look good in the entry hall but wouldn't run the long length of of kitchen/dining area because it would run the short distance between the walls. If I ran it lengthwise in the kitchen/dining area, I perceive it would look better in those rooms, including the living room. Does this make sense? Would it look odd running the entry hall up and down and the other rooms lengthwise. <- That's my plan for now unless you talk me off the cliff.
This area is the area in question.
Run the hall lengthwise ,then run the other rooms any direction you want. Brass or wood transition pieces are available in lengths from 3'-0" to 94-1/2"
Posts: 4,895
Threads: 0
Joined: May 2010
I would run everything left right The hall way will blend right in
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
I have a colonial with a center hall that has a similar issue. Everything in our house runs east-west as per your floor plan. Hallway looks just fine...having it all run the same will make the it look bigger.
Posts: 2,742
Threads: 0
Joined: Jan 2010
How about diagonal? 45 degrees?
My boss is a Jewish carpenter. Our DADDY owns the business.
Trying to understand some people is like trying to pick up the clean end of a turd.
Posts: 64,660
Threads: 3
Joined: Feb 2007
Location: Merryland
(06-30-2019, 01:13 PM)Foggy Wrote: How about diagonal? 45 degrees?
A: I don't like the way that looks but it's my wife have to make happy.
B: There's a lot of waste
I figured 10% to waste. We're remodeling the whole house, complete gut so every penny counts.
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
06-30-2019, 08:10 PM
(This post was last modified: 06-30-2019, 08:11 PM by Willyou.)
I would run it north and south in both hall and dining area and then use some other material in the kitchen more suitable to that location. Just me, I guess. I don't think wood flooring is appropriate in a kitchen or other area subject to large or small water spills. I think there will come a time when you will regret the choice.
Posts: 1,612
Threads: 0
Joined: Oct 2008
(06-30-2019, 09:51 AM)fixtureman Wrote: I would run everything left right The hall way will blend right in
+1
Posts: 1,565
Threads: 0
Joined: Feb 2003
(06-30-2019, 06:58 PM)Snipe Hunter Wrote: A: I don't like the way that looks but it's my wife have to make happy.
B: There's a lot of waste
I figured 10% to waste. We're remodeling the whole house, complete gut so every penny counts.
I think 10% waste is very conservative, IF you're willing to use 4-6" pieces in the closets and such. May have to cut a new groove in the cutoffs and have some spline material on hand.
